RE920C64/1-LF, 64 Way Single Sided DIN 41612 Extender Board FR4

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

DIN 41612 Extender Test Adaptor Boards

Removable jumpers and two measuring posts for each track
Signalling line pin 2 - 31
Large signalling line pin 1 + 32
Extender card: 100% electronically tested
Additional print at the component side
Manufacturer Part Number indicates rows present

PC / VME Bus Boards

PC Compatible Prototyping Boards

Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.

Microboard Pattern

Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.

Specificaties
Kenmerk Waarde
Type Extender Board
Connection DIN 41612
Number of Contacts 64
Base Material Epoxy Glass Fabric Laminate
Number of Sides 1
Copper Thickness 70µm
FR Material Grade FR4
Thickness 1.5mm
10 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
87,96
(excl. BTW)
106,43
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 87,96
Related Products
These boards feature special copper tracks and pads ...
Description:
These boards feature special copper tracks and pads on 0.1 in (2.54mm) pitch.Board holes 1.0mm (0.040 in). Particularly suited for use when mixing d.i.l. and discrete components on the same board. One end of the board is formed into a ...
Copper tracks and pads on a 0.1 in ...
Description:
Copper tracks and pads on a 0.1 in (2.54mm) pitch d.i.l. packages. Board holes 1.0mm (0.040 in). The component side has additional copper tracks for supply rails, etc. Drilling position marked for easy fitting of racking Card Handles or Card ...
Adaption circuit board for 40 Pin DIP 2.54 ...
Description:
Adaption circuit board for 40 Pin DIP 2.54 mm to DIP 1.27 mmEpoxy fibre-glass FR4 1.50 mmDouble-sided 35 μm CuPlated through holes (PTH)Surface chem. Ni/AuSolder stop maskFits on sockets with a distance of 15.24 mm.
Matrix boards with 1mm holes on a 2.54mm ...
Description:
Matrix boards with 1mm holes on a 2.54mm pitch. Recommended for wire-wrapping applicationsEpoxy glass - CEM 301.6mm thick, copper-cladSingle sidedHole pitch 2.54mm (0.1in)Hole dia 1.0mm.