Vent-Axia Solo Plus T Solo Plus Rectangular Flush Mounted, Surface Mounted Extractor Fan

  • RS-stocknr. 884-1008
  • Fabrikantnummer Solo Plus T
  • Fabrikant Vent-Axia
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Vent-Axia Solo® Plus Centrifugal Bathroom/Toilet Fan

The Solo Plus range from Vent-Axia has been specially designed for through the wall and ducted applications, suitable for internal bathrooms, toilets and other small rooms. Finished in white, the Solo Plus can be flush or surface mounted, with a 100mm circular spigot for rear entry or connecting to a vertical ducting system. The spigot can also be adjusted for side ways exhaust enabling recessed ceiling installations within limited ceiling voids. The powerful centrifugal impeller allows for installations with longer duct runs using 100mm ducting, whilst still achieving 15 l/s as required by Document F of the current Building Regulations.

Continuous running products, such as the Solo Plus installed in all wet areas of a dwelling are classed as a wholehouse ventilation system and therefore, only needs to move the amount of air as laid down in table 1.1b of Document F.

The Solo Plus has a choice of two boost/override motor speeds set at installation, medium (17l/s) or high (22l/s), with an optional constant trickle speed (9l/s), also selectable at installation except in the P model. Depending on the model, the fan will switch from trickle (if selected) to boost (medium or high) via the pullcord/ light switch/humidity sensor/PIR.

Choice:
884-1004: Solo Plus P with pullcord
884-1008: Solo Plus T with timer
884-1017: Solo Plus HT with humidity and timer

Filterless as standard - innovative impeller design means no need for a filter
Meets current Building Regulations Approved Documents F & L requirements for domestic bathrooms and toilets
IPX4 rated
Flush or surface mountable
Adjustable rear or side exit spigot
Extremely low sound levels
Suitable for wall, ceiling and panel mounting

Wall / Ceiling Extractor Fans

Specificaties
Kenmerk Waarde
Function Extraction
Noise Level 11.5 (Trickle) dBA, 24 (Min Boost) dBA, 34.5 (Max Boost) dBA
Mounting Flush Mounted, Surface Mounted
Face Dimensions 263 x 224mm
Depth 161mm
Face Height 263mm
Face Width 224mm
Configuration Rectangular
Special Features Adjustable Humidity Sensor, Adjustable Timer Overrun, Constant Trickle Option, Delay On Timer Option
Series Solo Plus
Termination Type Screw
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
187,71
(excl. BTW)
227,13
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 187,71
Related Products
These fans develop higher static pressure than mixed ...
Description:
These fans develop higher static pressure than mixed flow or axial fans making them suitable for high performance/volume applications etc. Compact design for use in confined spacesOutlet guide vanes straighten air flowMaintenance free motor, totally enclosed with thermal protectionGalvanised steel ...
The Vent-Axia SDX Euroflow in-line centrifugal duct fans ...
Description:
The Vent-Axia SDX Euroflow in-line centrifugal duct fans are designed around an efficient backward curved centrifugal impeller and external rotor motor to ensure a compact design, high performance and low sound levels.The in-line fan casing is constructed from pressed steel ...
High performance extract/intake fans for use in single ...
Description:
High performance extract/intake fans for use in single and double glazing, and most types of materials up to 32mm thick. A unique speed control pack enables high, medium or low speeds to be preset to suit room size or specific ...
Round, easy to install, intake/extract fans with a ...
Description:
Round, easy to install, intake/extract fans with a spigot and ring fixing method which provides a watertight joint with most types of glazing. Thermal overload protected motor which will run at any angleLow noise, low density, 5 blade impellerOperating temperature ...