Murata Ferrite Bead 0.85 mm (Surface) (0805) (Chip Bead), 30 Ω impedance at 100 MHz
- RS-stocknr.:
- 104-8542
- Fabrikantnummer:
- BLM21PG300SH1D
- Fabrikant:
- Murata
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 104-8542
- Fabrikantnummer:
- BLM21PG300SH1D
- Fabrikant:
- Murata
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Murata | |
| Product Type | Ferrite Bead | |
| Package Type | 0805 | |
| Impedance at 100 MHz | 30Ω | |
| Current Rating | 400mA | |
| Sub Type | Chip Bead | |
| Mount Type | Surface | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 125°C | |
| Length | 2mm | |
| Maximum DC Resistance | 0.014Ω | |
| Standards/Approvals | REACH, RoHS | |
| Depth | 1.25mm | |
| Height | 0.85mm | |
| Application | Safety, Automotive, Powertrain | |
| Series | BLM21P | |
| Automotive Standard | AEC-Q200 | |
| Material | Ferrite | |
| Alles selecteren | ||
|---|---|---|
Merk Murata | ||
Product Type Ferrite Bead | ||
Package Type 0805 | ||
Impedance at 100 MHz 30Ω | ||
Current Rating 400mA | ||
Sub Type Chip Bead | ||
Mount Type Surface | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 125°C | ||
Length 2mm | ||
Maximum DC Resistance 0.014Ω | ||
Standards/Approvals REACH, RoHS | ||
Depth 1.25mm | ||
Height 0.85mm | ||
Application Safety, Automotive, Powertrain | ||
Series BLM21P | ||
Automotive Standard AEC-Q200 | ||
Material Ferrite | ||
- Land van herkomst:
- JP
SMD 0805 Ferrite Filters- BLM21P Series
BLM series ferrite beads from Murata do not require a ground connection and are Ideal for use in circuits with unstable ground lines. At noise frequencies, these ferrite beads are designed to function nearly as resistors, leaving signal wave forms undistorted and reducing the possibility of resonance. The nickel barrier construction of the external electrodes enables excellent solder heat resistance. Filters composed of ferrite pearl inductance are designed to remove EMI from continuous voltage lines.
BLM_P ferrite beads have low DC resistance, making them Ideal for high current circuits.
This series of ferrite beads are designed for general use applications.