Molex Premise Networks ST to ST Multimode Fibre Optic Adapter

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: PL
Productomschrijving

Molex Fibre Wall Enclosure - 601 Series

601 series fibre management interface units for splicing and direct termination of ST and SC connections with multi-mode performance. These 601 series fibre management interface units are wall mounting with a lockable hinged front cover and allow access for patching through the top, bottom and rear of the unit. The adaptors are mounted on modules which snap into the unit, the splice holders are designed to accept up to 8 fusion splice protectors or mechanical splices. An accessory kit is supplied with these 601 series fibre management interface units which consists of cable ties, labelling and mounting kits.
Stock number 362-9418 is a 6 port enclosure for 6 ST adapters
Stock number 362-9424 is an 8 port enslosure for 4 SC duplex adapters

Specificaties
Kenmerk Waarde
Connector Type ST to ST
Single/Multimode Multimode
Colour Grey
Housing Material Plastic
Connector Type A ST
Connector Type B ST
Series 601
12 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
31,78
(excl. BTW)
38,45
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 31,78
15 +
€ 30,51
Related Products
Multimode ST® compatible connector which offers low installed ...
Description:
Multimode ST® compatible connector which offers low installed cost and high performance. The connector offers excellent repeatability and is supplied with a high quality PC (physical contact) finish on advanced ceramic ferrule which ensures outstanding reflection characteristics. Each connector is ...
LC quad coupling adapter with a singlemode configuration. ...
Description:
LC quad coupling adapter with a singlemode configuration. This LC quad coupling adapter has a blue UL-V0 thermoplastic housing a ceramic alignment sleeve and is flanged with built-in retention clips to aid panel mounting. The panel cut-out for this LC ...
FC/PC connector with one-piece metal body and precision ...
Description:
FC/PC connector with one-piece metal body and precision ceramic end fitting in zirconium oxide, for single-mode fibres with external diameters of 125 μm, 2.8 mm wired.Screw locking; plug indexing.Return spring ensures physical contact between optical faces.Fully compatible with NTT standard. ...
Fire optic plug for V.24 data transfer with ...
Description:
Fire optic plug for V.24 data transfer with DTE or DCE configuration (IBM PC compatible). Connections for PMMA tape conduit 1000 μm (UN1 adapter), PMMA sheathed cable 1000 μm (UN2 adapter) and fibreglass 50 / 125 μm or 62.5 / ...