Dorgard Fire Alarm Control Panel

  • RS-stocknr. 177-0150
  • Fabrikantnummer 943-3945
  • Fabrikant Dorgard
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Dorgard SmartSound™

Dorgard SmartSound is a wireless solution for legally holding open fire doors, automatically releasing them to close when a fire alarm sounds. SmartSound technology means the door units are not triggered by the noise of a vacuum cleaner.

Benefits

•New SmartSound technology — not triggered by vacuum cleaners •Three-year battery life (2 x LR14 C-size batteries included) and three-year warranty
•205mm(H) x 195mm(W) x 45mm(D)
•Carpet friendly — leaves no marks
•Can be fitted to any door up to 160kg in weight and 1600mm wide
•Suitable to up to 60-minute fire doors
•EN1155, EN1634, EMC Directive, Radio Equipment Directive, CE Marked
•Suitable for Category B installations under BS7273-4 2015
•ABS plastic housing
•No programming, just fit and forget
•Installed in under five minutes

How Dorgard SmartSound works

•Wireless technology — battery powered
•Fire doors can be held open at any angle
•Responds when alarm is activated
•As soon as alarm is activated, the plunger is released and the door will close

Alternative products

Also available in black (177-0149)

Specificaties
Kenmerk Waarde
Accessory Type Automatic Fire Door Hold
9 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
285,36
(excl. BTW)
345,29
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 285,36
Related Products
HelaDuct HTWD-HF wiring ducts are used to route ...
Description:
HelaDuct HTWD-HF wiring ducts are used to route and protect wires in control panels and switching systems where there are high demands on personal or material safety in case of fire, such as in public transport, tunnels, data-processing centers or ...
This versatile relay is ideal for applications requiring ...
Description:
This versatile relay is ideal for applications requiring discrete and cost effective local switching. Single gang housingSupplied complete with back boxLED status indicator on front plateReverse polarity protectedDual change over relay outputFits single gang 33mm depth backboxes.
The MCP range of indoor manual call points ...
Description:
The MCP range of indoor manual call points replaces their standard 'W' indoor series. Break glass type but flexible re-settable element available as retro-fit itemMonitoring ResistorSurface mountingAvailable in two resistance versions to suit most applications: 470 Ω & 680 ΩPatented ...
Transparent hinged coverAdditional protection from accidental operationUseful in ...
Description:
Transparent hinged coverAdditional protection from accidental operationUseful in high traffic areas : stairwells and corridorsReduces nusiance false alarms, seal has to be broken firstAll indoor and outdoor KAC call points can be fitted with these coversCustomised branding available.