Float Switch Horizl Ext Mnt 25W Nylon

  • RS-stocknr. 725-9852
  • Fabrikantnummer RSF83Y100R
  • Fabrikant Cynergy3
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Cynergy3 Horizontal Float Switches

Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards.

WRAS approval explained

WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard.

What materials can you choose from?

• Nylon
• Polypropylene
• Polypropylene Sulfide (PPS)

Features and Benefits

• Operating temperature: -10 °C to +120 °C
• N/O or N/C Switch output
• Switch action may be reversed by rotating the switch through 180º
• Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile
• Flying Lead
• M12 plug connection
• Internal & external fitting inside a tank
UL recognised

Typical Applications

These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units.

Note

Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads.

This float switch is designed for mounting through the outside wall of a tank using a inch NPT or inch BSP threaded hole or boss

Nylon material
External mounting
100cm PVC flying leads
WRAS approved

Product Application Information

This nylon float switch is most suitable for use in some organic and inorganic chemicals and many oils. Typical applications include diesel generators, hydraulic oil and gearbox oil levels.

Specificaties
Kenmerk Waarde
Device Type Float
Mounting Type Horizontal External
Switch Output NO/NC
Body Material Nylon
Cable Length 1m
Minimum Operating Temperature -20°C
Maximum Operating Temperature +75°C
Maximum Current 600 mA
Series RSF80
11 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
173 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
14,82
(excl. BTW)
17,93
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 14,82
5 - 9
€ 14,35
10 +
€ 13,88
Related Products
This RS PRO float switch is ideal for ...
Description:
This RS PRO float switch is ideal for water dispensers, tank monitoring systems, vending machines, coffee machines and printing machines. They are made from a Polypropelene housing which makes them suitable for a wide range of applications. They are even ...
Professional range of LS-74780 series single point level ...
Description:
Professional range of LS-74780 series single point level switches from Gems Sensors. The LS-74780 series level switches are suited for service and ideal for use in chemical and plating applications. All models are highly reliable and excellent quality.
A reusable, compact leak detection switch that is ...
Description:
A reusable, compact leak detection switch that is ideal for use with double wall tanks, containment sumps and double wall pipes. The LS-10 uses dry switching for increased reliability and is easy to clean and reinstall after being triggered. The ...
Reliable & robust mercury-free Sump Float switch designed ...
Description:
Reliable & robust mercury-free Sump Float switch designed for use within applications which activate electrical components. Switch-tek LV41 series enables applications to autonomously start and stop. Float switches of this mercury-free design are universally used within pump automation applicationsHigh quality ...