Switch, Vert Int Mnt, PPS, 100VA

  • RS-stocknr. 756-4273
  • Fabrikantnummer RSF56Y100J1/8
  • Fabrikant Cynergy3
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Cynergy3 RSF50 Series Float Switches

Cynergy3 RSF50 float switches are compact devices suitable for vending machines printing system and chemical dosing equipment, for example. RSF50 float switches are vertically mounted and feature a single switch.
There is a range of different material options available within the RSF50 series so you will be sure to find a suitable float switch for more commonly used liquids.
The direction of the switch can be reversed by firstly removing the float, inverting the switch and re-fitting it to the stem.

Within the series there are 5 ranges:
RSF53 (black) - Nylon
RSF54 (opaque) - Polypropylene (WRAS approved)
RSF56 (grey) - Polyphenylene Sulphide (PPS)
RSF57 (green) - Polyvinylidene Fluoride (PVDF)
RSF58 (white) - Polypropylene (UL approved)
Note - the different ranges feature other differences. Please refer to the Datasheet for more information on technical specifications.

What contact types are there?
The RSF50 float switches can be configured for N/O (Normally Open) or N/C (Normally Closed) operation.

What mounting thread does it have?
RSF50 float switches have either M12 or 1/8” NPT mounting thread. This is depicted by the last part of the part number. If it ends in “B” or “C”, it is an M12. If it ends in “1/8” it is 1/8” NPT.

Note

Part numbers ending in '1/8' have a 1/8"NPT mounting thread
Part numbers ending in 'C' have an M12 mounting thread

Supplied with

epoxy sealed leadouts

Warning

  • The cable entry point must NOT under any circumstances be submerged.
    On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
    On the Vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Specificaties
Kenmerk Waarde
Device Type Float
Mounting Type Vertical
Switch Output NO/NC
Body Material Polyphenylene Sulfide
Cable Length 1m
Minimum Operating Temperature -20°C
Maximum Operating Temperature +75°C
Maximum Current 600 mA
Gasket Material Nitrile
Series RSF50
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 17-07-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
20,05
(excl. BTW)
24,26
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 20,05
5 - 9
€ 19,44
10 +
€ 18,81
Related Products
Reliable & robust mercury-free Sump Float switch designed ...
Description:
Reliable & robust mercury-free Sump Float switch designed for use within applications which activate electrical components. Switch-tek LV41 series enables applications to autonomously start and stop. Float switches of this mercury-free design are universally used within pump automation applicationsHigh quality ...
Reliable & robust mercury-free Sump Float switch designed ...
Description:
Reliable & robust mercury-free Sump Float switch designed for use within applications which activate electrical components. Switch-tek LV41 series enables applications to autonomously start and stop. Float switches of this mercury-free design are universally used within pump automation applicationsHigh quality ...
The ENM-10 level regulator is a simple method ...
Description:
The ENM-10 level regulator is a simple method for level control. It consists of a mechanical switch in a plastic casing suspended by its own cable at the desired height. When the liquid reaches the regulator the casing tilts and ...
Side mounting switches consisting of a reed switch ...
Description:
Side mounting switches consisting of a reed switch and pivoted actuator magnet encapsulated in a waterproof housing. Can be used for 'normally open' or 'normally closed' operation, depending on orientationAll units WBS approved, product for use in hot and cold ...