Switch, SS, 1/2NPT, 180 DegreeC

  • RS-stocknr. 756-4292
  • Fabrikantnummer SSF212X100H
  • Fabrikant Cynergy3
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

Cynergy3 SSF211 and SSF212 Horizontal Float Switches

From Cynergy3, the SSF211 series and SSF212 series are horizontal float switches. They operate in liquids with Specific Gravity (SG) of 0.8 or above. These float switches are constructed from a reed switch and pivoted actuator magnet. SSF211 and SSF212 switches feature an N/C (normally closed) contact.

SSF211 float switches are designed for horizontal mounting within a tank. They are only suitable for applications where you have suitable access to the inside of the tank so that you can fit them. SSF212 float switches can be mounted from outside the tank and do not require access.

Features & Benefits

• While supplied with an N/O contact, you can easily configure this to N/C (normally closed) by inverting the switch by 180° when you mount it. Instead of the float moving in a downwards direction as standard, it would move in an upwards direction away from the main body of the switch.
• These float switches feature a compact design at only 47 mm long.
• The stem is constructed from SS304 stainless steel while the float is made from SS316 stainless steel. This ensures that these limit switches are suitable for use in the most rugged environments.
• All SSF211 float switches are fitted with a 1 m long 17/0.10 (AWG22) cable. They can be fitted internally via a 1/8” BSP thread.
• SSF212 float switches are fitted with a 1 m long 17/0.10 (AWG22) cable, plug and socket or M12 socket. This varies by model. They can be externally fitted via a 1/2” NPT thread.

Specificaties
Kenmerk Waarde
Device Type Float
Mounting Type Horizontal
Switch Output NO/NC
Body Material Stainless Steel
Cable Length 1m
Minimum Operating Temperature -20°C
Maximum Operating Temperature +180°C
Maximum Current 500 mA
Maximum Pressure 5bar
Series SSF212
17 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
125,84
(excl. BTW)
152,27
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 125,84
Related Products
A robust, compact level switch suitable for use ...
Description:
A robust, compact level switch suitable for use in contaminated liquids. The LS-240-E is accepted by Germanischer Lloyd and the German Navy and is ideally suited to applications involving heavy mechanical loads.
The Cynergy3 MS series of float switches are ...
Description:
The Cynergy3 MS series of float switches are designed for large tanks, cisterns or reservoirs, and can be installed on submersible pumps. The MS float switches are capable of reaching 100m in depth. MS float switches come with a 5m ...
Side mounting switches consisting of a reed switch ...
Description:
Side mounting switches consisting of a reed switch and pivoted actuator magnet encapsulated in a waterproof housing. Can be used for 'normally open' or 'normally closed' operation, depending on orientationAll units WBS approved, product for use in hot and cold ...
Horizontal mount with right angled stemSPST outputInternal vessel ...
Description:
Horizontal mount with right angled stemSPST outputInternal vessel mountingFloat reversal, rise or fall operateTop or bottom tank mountingSilicone sealing washerMaximum pressure: 10 bar Kg/cm2Cable: XLPE, AWG22Contact resistance: 200mΩClearance hole diameter: 10mm.