Sensata / Cynergy3 RSF70 Series Horizontal Nylon Float Switch, Float, NO/NC, 240V ac Max, 120V dc Max
- RS-stocknr.:
- 869-7570
- Fabrikantnummer:
- RSF73YNP
- Fabrikant:
- Sensata / Cynergy3
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
49 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 20,97
(excl. BTW)
€ 25,37
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 20,97 |
5 - 9 | € 20,30 |
10 + | € 19,66 |
- RS-stocknr.:
- 869-7570
- Fabrikantnummer:
- RSF73YNP
- Fabrikant:
- Sensata / Cynergy3
Wetgeving en compliance
- Land van herkomst:
- GB
Productomschrijving
Cynergy3 Horizontal Float Switches
Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards.
WRAS approval explained
WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard.
What materials can you choose from?
Nylon
Polypropylene
Polypropylene Sulfide (PPS)
Polypropylene
Polypropylene Sulfide (PPS)
Features and Benefits
Operating temperature: -10 °C to +120 °C
N/O or N/C Switch output
Switch action may be reversed by rotating the switch through 180º
Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile
Flying Lead
M12 plug connection
Internal & external fitting inside a tank
UL recognised
N/O or N/C Switch output
Switch action may be reversed by rotating the switch through 180º
Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile
Flying Lead
M12 plug connection
Internal & external fitting inside a tank
UL recognised
Typical Applications
These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units.
Note
Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads.
Sensata Cynergy3 Horizontal Float Switch, NO/NC, 240V AC - RSF70 Series - RSF73YNP
This float switch from Sensata's Cynergy3 range is designed to monitor and respond to changing liquid levels in your tanks, containers or wells. It's designed for external mounting, so there's no need for access to the inside of the tank. Thanks to its wide operating temperature range of -20°C to +75°C, it's suitable for use with both hot and cold liquids. For enhanced versatility, you can reverse the switch action by mounting the switch so the float can move upward rather than downward. It's commonly used to activate pumps or alarms in waterworks, sewage systems and food processing machinery.
Features & Benefits
• M12 plug offers easy connection to circuitry and devices without the need for any additional tooling
• Nylon body for durability and corrosion resistance
• Nitrile gasket seal and back nut to help prevent leakage
• Nylon body for durability and corrosion resistance
• Nitrile gasket seal and back nut to help prevent leakage
How does this switch work?
The switch's actuator magnet causes electromagnetic fluctuations as it rises and falls with liquid levels. The corresponding sensor reacts to any changes in your tank's magnetic field and triggers the contacts to open or close.
Specificaties
Kenmerk | Waarde |
---|---|
Device Type | Float |
Mounting Type | Horizontal |
Switch Output | NO/NC |
Body Material | Nylon |
Minimum Operating Temperature | -20°C |
Maximum Operating Temperature | +75°C |
Maximum AC Voltage | 240V |
Maximum DC Voltage | 120V |
Maximum Current | 600 mA |
Gasket Material | Nitrile |
Series | RSF70 |
Standards Met | WRAS |