CFS2 Series Cable Float Switch SPDT

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: IT
Productomschrijving

Dwyer Instruments CFS2 Cable Float Switch

The Series CFS2 Cable Float Switch from Dwyer is a mechanically actuated floating switch used for activating the electrical components, mostly pumps, to start and stop automatically.

What are these used for?

The CFS2 is used for level control of liquids for filling or draining reservoirs and tanks.

Benefits:

• High reliability
• Cost saving
• Easy installation
• Used for pump automation
• Counterweights and cable hangers for various applications
• Mercury-Free
CE Approved

Features:

• Pressure limits: 14.5 psi (1 bar)
• Enclosure rating: IP68
• Cable material: PVC
• Switch type: SPDT
• Cable length: 20 ft (6.10m)

How does it work?

As fluid level rises the float will also rise, resulting in a tilt of the micro-switch located inside the housing. This tilt will generate a signal that can be used to actuate a motor or signal an indicator alarm. To ensure the proper function of the CFS2, it is necessary to secure the electric cable inside the tank or well. The length of the cable measured between the fixture point and the body of the CFS2 determines the total extension of the float and also the resulting distance between the pump stopping and starting level. It is essential to ensure that there are no obstructions in the CFS2 operational area before proceeding.

How to install CFS2 Series?

• Insert the cable into the counterweight, turning it. This will result in the detachment of the plastic ring inserted in the mouth (if necessary use a screwdriver to aid in the detachment of the ring). Place the ring at the point on the cable where the counterweight is to be attached

• Attach the counterweight on the ring by turning it and using moderate pressure.
Note: Counterweight not included

Maintenance and repair

Check and clean wetted parts with water or damp cloth regularly.

Where can you use CFS2 series?

• Water level monitoring
• Tank level control
• Industrial water control
• Filling or draining reservoirs and tanks

Specificaties
Kenmerk Waarde
Device Type Float Switch
Mounting Type Cable
Switch Output SPDT
Body Material Polypropylene
Cable Length 240.2in
Minimum Operating Temperature 0°C
Maximum Operating Temperature +50°C
Maximum AC Voltage 250V
Maximum Pressure 1bar
Standards Met CE
Series CFS2
Current Rating 10 A
16 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
97 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
27,64
(excl. BTW)
33,44
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 27,64
Related Products
The Gems Sensors LS-7 series are ideal for ...
Description:
The Gems Sensors LS-7 series are ideal for high volume use in small tanks and vessels. Engineered plastics construction offers a broad compatibility in water, oils and chemicals, making them suitable for various applications. All models are highly reliable and ...
The RS PRO float switch is a horizontally ...
Description:
The RS PRO float switch is a horizontally mounted switch. This is manufactured in SS 304 and 316 and works in liquids of SG 0.8 minimum. The switch action may be reversed by mounting the device with the orientation arrow ...
The RS PRO 312-7164 is an internal fitting ...
Description:
The RS PRO 312-7164 is an internal fitting float switch. This compact switch measures just 64mm high and 28mm in diameter. The 312-7164 is made from 316 grade stainless steel which means it offers great resistance against corrosion. How is ...
The Cynergy3 MS series of float switches are ...
Description:
The Cynergy3 MS series of float switches are designed for large tanks, cisterns or reservoirs, and can be installed on submersible pumps. The MS float switches are capable of reaching 100m in depth. MS float switches come with a 5m ...