Burkert Flow Controller, Cable Plug, PNP, 12 → 36 V dc

  • RS-stocknr. 249-7462
  • Fabrikantnummer 423913
  • Fabrikant Burkert
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving
//media.rs-online.com/t_line/L249746-01.gif

Burkert Flow Transmitter + Sensor

The Burkert flow transmitter + sensor has an open collector (PNP/NPN) type output and cable plug electrical connection device. It is designed to measure the continuous flow of liquids. Its operating voltage rating ranges between 12VDC and 36VDC. This sensor produces a signal which can be transmitted and processed enabling the end-user to get a flow measurement. The division is performed by measuring the pulses for the required unit of flow (litres per min.) and then, by the use of four rotary switches on the divider unit (discontinued) - that it is on top of the transmitter to divide signals enabling the output to be tailored to individual requirements. The correct dividing factor can be set up to give the required pulses out for the flow rate.

Features and Benefits

• Signal pickup through hall sensor
• Flow velocity ranges between 0.3m/s and 10m/s
• Sensor size range is DN15 to DN65 with bayonet fitting
• 3-wire frequency for direct connection to PLC (PNP and NPN)
• Body material is polycarbonate PPO

Applications

• Flow measurement and dosing control
• Water treatment and process technology
• Cooling water monitoring
• Industrial wastewater treatment
• Auxiliary plants irrigation
• Ideal system solutions for pure water and chemical aggressive liquids

Certifications

• IP65 rated
• EN 175301803
• DIN 43650

Specificaties
Kenmerk Waarde
Electrical Connection Cable Plug
Control Output PNP
Mounting Style Compact
Supply Voltage 12 → 36 V dc
Pipe Diameter Range DN 6 → 65 mm
Minimum Operating Temperature -15°C
Maximum Operating Temperature +60°C
27 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
143,58
(excl. BTW)
173,73
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 143,58
Related Products
Fluid passes through internal flow straighteners, to stabilize ...
Description:
Fluid passes through internal flow straighteners, to stabilize turbulence, before impacting on the vaned turbine rotor which rotates at a speed proportional to the flow rate. The rotor vanes have stainless steel tips which are detected by a sensor mounted ...
The magnetic-inductive volumetric flow sensors of the SM ...
Description:
The magnetic-inductive volumetric flow sensors of the SM series monitor liquids. They detect the three process categories volumetric flow quantity, consumed quantity and medium temperature. Peak consumption, present consumption or accumulated consumption can be accessed and adjusted via programmed switch ...
Compact flow indicator using microprocessor technologyFast reaction time ...
Description:
Compact flow indicator using microprocessor technologyFast reaction time (1 → 2 sec)Adaptable to various process connectionsAutomatic adjustment to nominal flow and minimum flow via setting buttons or programming lineAll parameters can also be set manuallyLocking facilityOptical indication of nominal flow, ...
Sensor and signal processor in one stainless steel ...
Description:
Sensor and signal processor in one stainless steel compact housingOn-delay time: 8s (typical)Ingress protection to IP67Simple adjustment via LED bar graph and potentiometerResponse time: 12s max.Switch on and off times: 2s typicalOutput - PNP transistor; short-circuit proof; reverse polarity protectedFluid ...