Foot Switch Actuator for Airswitches

Wetgeving en compliance
Land van herkomst: GB

Foot Actuator – Heavy Duty

A robust diecast foot actuator with a satin black finish. The top has a diamond cut surface affording good grip.
Anti-skid feet
2 m of 9 mm dia. armoured air tubing
Mechanical Life 5x104 Operations
Operating temperature range -10°C to +60°C (subject to tube length limitations - see additional data tables)

Foot Actuator

Actuators, Switch Elements, Tubing & Accessories

The air operated switch system offers enhanced safety in hazardous areas by allowing remote operation of electrical circuits.
The actuator is a bellows which, when compressed moves air down the air tubing to the switch element. This compressed air then expands a bellows in the switch, which operates the electrical contacts.
When used in wet environments or where electrical switching would be dangerous due to arcing, the switch and all electrical wiring can be located outside the hazardous area giving the operator total electrical isolation for the equipment.
Such applications include: Battery charging rooms, laboratories, garages, or wherever explosive gases, vapours or powders may exist.

When assembled the air switch and actuator form a sealed system, therefore temperature variation will cause pressure changes, which can in extreme cases affect the performance of the switch. To prevent this the total volume of the system must be kept below a critical value for a given temperature range and, to this end, a maximum length of air tubing (and hence volume) can be given for any combination of switch and actuator.
The additional data tables give these lengths in metres; for moderate and extreme temperatures.

Kenmerk Waarde
Standards Met EN 60950, EN 61058, EN 61058-2-1, 2014/35/EU
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
58 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 71,19
5 - 9
€ 69,02
10 +
€ 66,77
Related Products
The switch module is used to control DC ...
The switch module is used to control DC powered devices with high capacities in control and switch cabinets. It is controlled via an external potential-free contact (thermostat or hygrostat), which is connected between terminal 3 and 4. It must be ...
The Belimo 2 X SPDT actuator switch has ...
The Belimo 2 X SPDT actuator switch has an adjustable switch point. The auxiliary switch is mounted onto the direct-coupled actuator. This switch has an adjustable U-clamp, which accepts round or square shafts and is a rotary/louvre actuator. It is ...
Introducing the new XCS range of safety switches.The ...
Introducing the new XCS range of safety switches.The devices have been designed in compliance with the standards currently in effect: IEC 60947, EN 292, EN 60204, EN 1088 to ensure the safety of machine operators and operating reliability.Protection of operators ...
D-J7 series auto switch for various actuators and ...
D-J7 series auto switch for various actuators and air grippers. Solid stateGeneral purposeRail mountlead wire (3m).