Digilent 410-300 GENESYS2 KINTEX-7 Development Board ADC1410 for DAC121S101

Bekijk alle FPGA Development Tools
Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 1.050,21

(excl. BTW)

€ 1.270,75

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Tijdelijk niet op voorraad
  • Verzending 8 stuk(s) vanaf 30 januari 2026
  • Plus verzending 34 stuk(s) vanaf 06 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 - 1€ 1.050,21
2 - 4€ 1.008,19
5 +€ 924,18

*prijsindicatie

RS-stocknr.:
134-6471
Fabrikantnummer:
410-300
Fabrikant:
Digilent
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Digilent

Kit Classification

Development Board

Product Type

Plug-In Module

Programmable Logic Technology

FPGA

For Use With

DAC121S101

Featured Device

ADC1410

Kit Name

GENESYS2 KINTEX-7

Standards/Approvals

RoHS

Genesys 2 Kintex-7 FPGA Development Board


The Digilent Genesys 2 board is a digital circuit development platform based on the Kintex-7™ Field Programmable Gate Array (FPGA) from Xilinx. Genesys 2 is well suited for data and video processing applications. Genesys 2 is compatible with Vivado Design Suite as well as the ISE toolset, which includes ChipScope and EDK.

XC7K325T-2FFG900C FPGA Features


• 50950 logic slices each with 4 x 6-input LUTs and 8 x flip-flops

• Close to 16Mbits of fast block RAM

• 10 x clock management tiles, each with phase-locked loop (PLL)

• 840 x DSP slices

• Internal clock speeds exceeding 450MHz

• On-chip analogue-to-digital converter (XADC)

• Up to 10.3125Gbps gigabit transceivers

• 1800Mbps DDR3 data rate with 32-bit data width

• Commercial -2 speed grade

Genesys 2 Board Features


• On-board 2 x MT41J256M16HA-107 1GiB DDR3 SDRAM memory

• On-board S25FL256S 256Mbit Quad-SPI serial NOR Flash memory

• On-board ADAU1761 SigmaDSP stereo audio CODEC

• On-board FT2232R USB-UART bridge controller

• On-board RTL8211E-VL Ethernet PHY

• 0.91in 128 x 32pixel OLED display

• microSD card slot

• On-board USB-JTAG programming via microUSB connector

• JTAG 6-pin header

• RJ45 socket for 10/100/1000 Ethernet LAN

• USB-A OTG 2.0 socket

• USB-A Host MSD/HID socket

• HDMI display (source) socket

• HDMI display (sink) socket

• DisplayPort (source) mDP socket

• DisplayPort (sink) mDP socket

• VGA display (16-bit colour) DE15 socket

• HPC FMC 400-pin connector with 10 x GTX lanes

• 4 x 3.5mm jack sockets for Microphone, Line In, Line Out, Headphones

• 5 x 12-pin Pmod™ expansion connectors

• +12Vdc power supply barrel jack socket

• Cooling fan for FPGA device

• Power slide-switch

• Reset pushbutton

• Programming pushbutton

• 8 x User slide-switches

• 5 x User pushbuttons

• Power LED

• Programming Done LED

• Ethernet Activity LEDs

• 8 x User LEDs

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Supplied with

USB-A to Micro-B cable

Gerelateerde Links