Trenz Electronic GmbH TE0741-03-325-2CF 4 x 5 cm standard footprint, FPGA Module with Xilinx Kintex-7 XC7K325T-2CF
- RS-stocknr.:
- 176-0796
- Fabrikantnummer:
- TE0741-03-325-2CF
- Fabrikant:
- Trenz Electronic GmbH
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 176-0796
- Fabrikantnummer:
- TE0741-03-325-2CF
- Fabrikant:
- Trenz Electronic GmbH
Datasheets
Wetgeving en compliance
- Land van herkomst:
- DE
Productomschrijving
Trenz Electronic GmbH Programmable Logic Development Kits
The Trenz electronic carrier board is an industry-grade FPGA module integrating a Xilinx Kintex-7 325T FPGA, 8 MGTs (Multi-Gigabit Transceivers) and 32Mb flash memory for configuration and operation. It has powerful switch-mode power supplies for all on-board voltages. The rugged high-speed stacking strips provide a large number of configurable I/Os. All this on a tiny footprint, smaller than a credit card. It has an electric rating of either 3.3 V or 3.3V and 5V. It is used for industrial applications.
Features and Benefits:
Core voltage regulator 20A
It has 200MHz speed
It uses FPGA technology
Lead free
Low jitter oscillator with shutdown control 25MHz
MGT voltage regulators with control enable
on-board high efficiency DC-DC converters
Plug-on module with two 100-pin and one 60-pin high-speed hermaphroditic stacking strips
Programmable quad clock generator
Quad-SPI flash memory 256Mbit
It has 200MHz speed
It uses FPGA technology
Lead free
Low jitter oscillator with shutdown control 25MHz
MGT voltage regulators with control enable
on-board high efficiency DC-DC converters
Plug-on module with two 100-pin and one 60-pin high-speed hermaphroditic stacking strips
Programmable quad clock generator
Quad-SPI flash memory 256Mbit
Applications:
Data storage
Industrial Use
Industrial Use
Certifications:
WEEE
Specificaties
Kenmerk | Waarde |
---|---|
Classification | Module |
Programmable Logic Technology | FPGA |
Technology | FPGA |
Kit Classification | Module |
Featured Device | TE0741-03 |
Kit Name | 4 x 5 cm standard footprint, FPGA Module with Xilinx Kintex-7 XC7K325T-2CF |