Trenz Electronic GmbH TE0711-01-100-2C High IO Xilinx Artix-7 100T Module with speedgrade 2C and USB Module TE0711-01

Bekijk alle FPGA Development Tools
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
RS-stocknr.:
176-0805
Fabrikantnummer:
TE0711-01-100-2C
Fabrikant:
Trenz Electronic GmbH
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Trenz Electronic GmbH

Classification

Module

Programmable Logic Technology

CPLD, FPGA

Kit Classification

Module

Technology

CPLD, FPGA

For Use With

Modules in 4 x 5 cm Form Factors

Featured Device

TE0711-01

Kit Name

High IO Xilinx Artix-7 100T Module with speedgrade 2C and USB

Land van herkomst:
DE

Trenz Electronic GmbH Programmable Logic Development Kits


The Trenz electronic is an FPGA module integrating a Xilinx Artix-7 100T FPGA, 32Mb Quad SPI flash memory for configuration and operation. It has powerful switch-mode power supplies for all on-board voltages. The rugged high-speed stacking strips provide a large number of configurable I/Os. All this on a tiny footprint, smaller than a credit card. It has an electric rating of either 3.3V or 3.3V and 5V. It is used for industrial applications.

Features and Benefits:


• 100MHz MEMS oscillator
• AES bit-stream encryption
• Dual 100MBit Ethernet
• eFUSE bit-stream encryption
• Evenly spread supply pins for good signal integrity
• It has 200MHz speed
• Lead free
• MAC address EEPROM
• on-board high efficiency DC-DC converters
• Operating temperature ranges between 0°C and 70°C
• Plug-on module with two 100-pin hermaphroditic stacking strips
• Rugged for shock and high vibration
• Single-ended FPGA I/O pins available on B2B strips Up to 112
• System management and power sequencing

Certifications:


• WEEE