Wurth Elektronik 10A Panel Mount Fuse Holder for 5 x 20mm Fuse, 1P, 250V ac
- RS-stocknr.:
- 893-0615
- Fabrikantnummer:
- 696314001002
- Fabrikant:
- Wurth Elektronik
Niet beschikbaar
RS heeft dit product niet meer op voorraad.
- RS-stocknr.:
- 893-0615
- Fabrikantnummer:
- 696314001002
- Fabrikant:
- Wurth Elektronik
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Wurth Elektronik | |
| Fuse Holder Type | Panel Mount | |
| Fuse Size | 5 x 20mm | |
| Current Rating | 10A | |
| Voltage Rating | 250V ac | |
| Number of Poles | 1P | |
| Contact Material | Copper Alloy | |
| Terminal Type | Solder | |
| Compatible Fuse Length | 20mm | |
| Standards Met | cULus, RoHS Compliant, UL, UL94 V-0, VDE | |
| Compatible Fuse Sizes | Mini | |
| International Protection Rating | IP40 | |
| Compatible Fuse Diameter | 5mm | |
| Cap Style | Slotted | |
| Protection Category | PC2 | |
| Alles selecteren | ||
|---|---|---|
Merk Wurth Elektronik | ||
Fuse Holder Type Panel Mount | ||
Fuse Size 5 x 20mm | ||
Current Rating 10A | ||
Voltage Rating 250V ac | ||
Number of Poles 1P | ||
Contact Material Copper Alloy | ||
Terminal Type Solder | ||
Compatible Fuse Length 20mm | ||
Standards Met cULus, RoHS Compliant, UL, UL94 V-0, VDE | ||
Compatible Fuse Sizes Mini | ||
International Protection Rating IP40 | ||
Compatible Fuse Diameter 5mm | ||
Cap Style Slotted | ||
Protection Category PC2 | ||
Wurth Panel mount fuse holders
Wurth panel mount fuse holders have a rated current of 10A. The WRSH Shocksafe fuse holders offer glow wire tested plastic to ensure greater safety and resiliance to heat.
Contact plating Matt tin over Nickel.
Contact material Copper alloy.
Suitable 5x20mm fuses.
Contact plating Matt tin over Nickel.
Contact material Copper alloy.
Suitable 5x20mm fuses.
Panel Mounting
CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.