Phoenix Contact Fused DIN Rail Terminal, UK Series, 500 V, 6.3A, 5 x 20 mm, 5 x 25 mm, 5 x 30 mm Fuse, Black Single ATEX

Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: DE
Productomschrijving

Phoenix Contact, Fused DIN Rail Terminals

The Phoenix Contact UK-5-HESI series of fuse modular terminal blocks offer excellent protection to electrical systems, protecting them against overcurrent and short-circuiting. Easily clipped onto DIN rail, the range is easily interchanged and therefore offers you greater flexibility with the part.

Features and Benefits

• Large-surface labeling

• Safety lever locked in end position

• Hinged disconnect lever

• Flip-open compartment to accommodate a fuse

• Options to accommodate 5x20mm and 6.3x32mm fuses

• Terminal width 8.2 (5x20mm), and 10.2 (6.3x32mm)

Typical Applications

• Protecting critical sensor or relay equipment

Note

Parameters in tech. spec. table are with respect to UL and CSA Approvals. With UL approval these products have a nominal rating of 10A @ 600V; with CSA approval they have a nominal rating of 25A @ 600V

Approvals

UL recognised component, CSA certified

Specificaties
Kenmerk Waarde
Number of Levels Single
Wire Size 26 → 10 AWG
Number of Connectors 2
Colour Black
Pitch 8.2mm
Fuse Size 5 x 20 mm, 5 x 25 mm, 5 x 30 mm
Current Rating 6.3A
Voltage Rating 500 V
Termination Method Screw Down
Rail Type Compatibility NS35
Series UK 5-HESI
Hazardous Area Certification ATEX
335 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
165 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
Was € 7,20
5,918
(excl. BTW)
7,161
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 45
€ 5,918
€ 29,59
50 - 120
€ 5,62
€ 28,10
125 +
€ 5,324
€ 26,62
*prijsindicatie
Related Products
This universal range of terminals mounts on both ...
Description:
This universal range of terminals mounts on both asymmetric rail 'G' profile and Top hat profile. Moulded in tough flame-resistant polyamide 6.6, with a working temperature of -55°C to +130°C. The captive terminal screws have hardened heads to prevent burring. ...
All metal parts are of high strength copper ...
Description:
All metal parts are of high strength copper alloys Simple multi-conductor connection Maintenance-free "Reakdyn principle"All accessories are compatible with the CLIPLINE range.
The small spring mechanism in these terminals provides ...
Description:
The small spring mechanism in these terminals provides significant space saving, without sacrificing any of the usual features. Large terminal entry aperture allows bootlace ferruled cables to be fitted up to maximum cable capacity of the terminal.
Fuse terminals (HESI) adopt the functional operation of ...
Description:
Fuse terminals (HESI) adopt the functional operation of the fuse holder and power distributionLever disconnect terminals (HEDI) enable two bridging power sources to be directed separately in parallel (time-saving power supply)G-type fuse insert 5 x 20 mm.