Weidmuller Fused DIN Rail Terminal, W Series, 500 V, 15A, 6.3 x 32mm Fuse, Black Single

  • RS-stocknr. 768-4614
  • Fabrikantnummer WSI 4/2/LD 10-36V AC/DC -1880410000
  • Fabrikant Weidmuller
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Fused LED

This Weidmüller Fuse terminal is available in two different types, Fuse terminal with pivoting retaining lever and Fuse terminal with plug in SIHA fuse holder. The fuse holder is opened lever style and the fuse is shrouded when installed,Single LED indicates fuse failure

Note

The voltage and current ratings are to VDE ratings.

Approvals

CSA certified, UL listed, SEV, DEMKO, NEMKO, LLOYDS REGISTER OF SHIPPING, SETI, KEMA, Reg of USSR

The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. Current bars are constructed from 10 mm electrolytic copper to ensure a current loading more than nominal rating. Terminals are suitable for mounting on symmetric ’Top Hat’ rail only (BS5584:1978, EN 50022) and are touch proof in accordance with BS 3042.

Specificaties
Kenmerk Waarde
Number of Levels Single
Wire Size 30 → 10 AWG
Number of Connectors 2
Colour Black
Pitch 9.1mm
Fuse Size 6.3 x 32mm
Current Rating 15A
Voltage Rating 500 V
Termination Method Screw Down
Rail Type Compatibility TS35
Series W
Maximum Operating Temperature +120°C
Minimum Operating Temperature -50°C
12 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
187 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
Was € 8,75
3,38
(excl. BTW)
4,09
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 3,38
Related Products
This flexible terminal block enables a fuse connection ...
Description:
This flexible terminal block enables a fuse connection via the top level, a straight feedthrough middle level and, on the KDKS1/PE, an earth connection to the DIN rail by the bottom level. Fuse of 20x5mm or 25x5mm may be fitted. ...
All metal parts are of high strength copper ...
Description:
All metal parts are of high strength copper alloys Simple multi-conductor connection Maintenance-free "Reakdyn principle"All accessories are compatible with the CLIPLINE range.
The small spring mechanism in these terminals provides ...
Description:
The small spring mechanism in these terminals provides significant space saving, without sacrificing any of the usual features. Large terminal entry aperture allows bootlace ferruled cables to be fitted up to maximum cable capacity of the terminal.
UK 6-FSI/C is a single tier terminal block ...
Description:
UK 6-FSI/C is a single tier terminal block equipped with a location for flat-type fuses. The black polyamide (PA) terminal block has 2 connections and a maximum load current of 30A.