XY2CE Grab Wire Switch with E-Stop, 70m, NC, NO

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MY
Productomschrijving

Telemecanique XY2CE & XY2CB Emergency Stop Rope Pull Switches

These emergency stop trip wire switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the trip wire breaking.

Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m (for model XY2-CB30 a distance of 20m is recommended)
The XY2 CE1A296 comes with a pilot light (direct supply)

Note

The XY2 CB switch must not be used if the installation requires that the trip wire be angled but the XY2 CE switch can. In this case, the total sum of the angles through which the trip wire bends must not exceed 180°.

Standards

EN/ISO 13850:2006

Specificaties
Kenmerk Waarde
Range Preventa XY2
Series XY2CE
Reset Button Yes
Pole Configuration DPST
Normal State Configuration NC, NO
Indicator Type Rope Tension
Maximum Rope Span 70m
Maximum Current 3 A ac, 270 mA dc
Maximum AC Voltage 240V
Maximum DC Voltage 250V
Housing Material Stainless Steel (Cover), Zamak (Body)
Number of Cable Entries 3
Size of Cable Entries PG 13.5
Length 229mm
Width 105mm
IP Rating IP66
Standards Met CCC, CSA, CSA C 22-2, EAC, EN/IEC 60947-5-5, UL (NISD), UL 508
Minimum Operating Temperature -25°C
Dimensions 229 x 105 x 142 mm
E-Stop Button Yes
Maximum Operating Temperature +70°C
Depth 142mm
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
339,00
(excl. BTW)
410,19
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 339,00
Related Products
Analogue Time Switch for surface mounting and switchboard ...
Description:
Analogue Time Switch for surface mounting and switchboard panel mounting. These Time Switches are available in two different versions for Day with or without reserve. Daily or weekly programEasy programming with captive setting keysDimensions: 72 x 72mmEasy to read switching ...
The RMQ 16 range of control devices are ...
Description:
The RMQ 16 range of control devices are the perfect solution for the modern industrial sector. These pushbuttons are available with integrated multi-LED illumination in various colours with either momentary or maintained switching providing the right fit for your business ...
Herga 6210 wireless foot switch has a Thermoplastic ...
Description:
Herga 6210 wireless foot switch has a Thermoplastic body and is also battery operated with LED indication. The footswitch also includes a timeout for battery conservation. It is a singal pedal and runs on commercially available Alkaline cells. The foot ...
Insulation encapsulatedPivot lever actuationFor mounting on hinge axesFor ...
Description:
Insulation encapsulatedPivot lever actuationFor mounting on hinge axesFor monitoring rotatable and pivotable safety equipmentSwitch casing in accordance with EN 50047Protection rating IP 65.