AH49FNTR-G1 DiodesZetex,, Linear Hall Effect Sensor, 3 → 8 V, 3-Pin SC-59

  • RS-stocknr. 122-3345
  • Fabrikantnummer AH49FNTR-G1
  • Fabrikant DiodesZetex
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Hall Effect Sensors, Diodes Inc

A range of linear output Hall Effect sensor ICs, designed for position and proximity sensing from Diodes Inc.

Hall Effect Sensors, Diodes Inc

A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.

Specificaties
Kenmerk Waarde
Magnetic Type Linear
Mounting Type Surface Mount
Pin Count 3
Minimum Operating Supply Voltage 3 V
Maximum Operating Supply Voltage 8 V
Length 3.1mm
Width 1.7mm
Height 1.3mm
Dimensions 3.1 x 1.7 x 1.3mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +105 °C
Package Type SC-59
6000 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (On a Reel of 3000)
0,324
(excl. BTW)
0,392
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
3000 - 6000
€ 0,324
€ 972,00
9000 +
€ 0,308
€ 924,00
*prijsindicatie
Related Products
The Broadcom is a fully integrated Hall-effect based ...
Description:
The Broadcom is a fully integrated Hall-effect based isolated linear current sensors which are designed for AC or DC current sensing in industrial, commercial, and communications systems. Ratiometric output from supply voltageExtremely stable output offset voltage Near-zero magnetic hysteresis.
The BU52078GWZ is omnipolar Hall IC incorporating a ...
Description:
The BU52078GWZ is omnipolar Hall IC incorporating a polarity determination circuit that enables separate operation (output) of both the South and North poles. This Hall IC product can be in tablets, smart phones, and other applications in order to detect ...
Integrated quadrature sensor ICPole size independent operation4-pin quadrature, ...
Description:
Integrated quadrature sensor ICPole size independent operation4-pin quadrature, open collector outputs-40°C to 150°C operating temperature rangeZero speed operationNo calibration requiredInsensitive to mechanical vibrationProtection against reverse polarity and short circuit ApplicationsIndustrial speed and ...
The LEM GO-SMS series current transducer for electronic ...
Description:
The LEM GO-SMS series current transducer for electronic measurement of current with galvanic separation between primary and secondary circuit. It has application for drives and E-bikes. Hall effect measuring principleLow power consumptionExtremely low profileFixed offset and sensitivityResponse time is 2 ...