Si7210-B-02-IVR Silicon Labs,, Linear Hall Effect Sensor, 5-Pin SOT-23

  • RS-stocknr. 144-1567
  • Fabrikantnummer Si7210-B-02-IVR
  • Fabrikant Silicon Labs
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Si7210 I2C Hall Effect Magnetic Sensors

The Si7210 family of Hall-effect magnetic sensors from Silicon Labs features an I2C interface which enables full configurability of the sensor operate and release points and allows measurement of the magnetic field strength. The Si7210 sensor integrates a chopper-stabilized Hall element, low-noise amplifier, 13-bit ADC and comparator in a single compact package with I2C functionality.

• Digital I2C Interface with 4 selectable addresses
• Optional Digital Alert output
• Optional ratiometric analogue output
• Optional Tamper detect versions
• Wide 1.7 to 5.5 V operating voltage range
• Industry-leading sensitivity allows use with larger air gaps and smaller magnets
• Low power consumption to improve operating life in battery powered applications
• Compact 5-pin SOT23 package
• AEC-Q100 Qualified for automotive applications

The Si7210 family of Hall effect magnetic sensors from Silicon Labs combines a chopper-stabilized Hall element with a low-noise analog amplifier, 13-bit analog-to-digital converter, and an I 2C interface. Leveraging Silicon Labs' proven CMOS design techniques, the Si7210 family incorporates digital signal processing to provide precise compensation for temperature and offset drift. Compared with existing Hall effect sensors, the Si7210 family offers industry-leading sensitivity, which enables use with larger air gaps and smaller magnets.

High-Sensitivity Hall Effect SensorHigh-Precision 13-bit Signal PathOutput Bandwidth up to 20 kHzSensitivity Drift < ±5% over 0-70 °COptional Digital Alert OutputOptional Ratiometric Analog OutputTemperature Sensor Data also available

Hall Effect Sensors, Silicon Labs

Specificaties
Kenmerk Waarde
Magnetic Type Linear
Mounting Type Surface Mount
Pin Count 5
Minimum Magnetic Sensor Release Point ±1.1 mT
Maximum Magnetic Sensor Operating Point ±0.2 mT
Minimum Operating Supply Voltage 1.7 V
Maximum Operating Supply Voltage 5.5 V
Length 2.9mm
Width 1.6mm
Height 1.15mm
Dimensions 2.9 x 1.6 x 1.15mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Package Type SOT-23
Typical Magnetic Sensor Hysteresis 0.4 mT, 17 (Digital) %
Automotive Standard AEC-Q100
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 07-05-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (On a Reel of 3000)
0,97
(excl. BTW)
1,17
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
3000 - 6000
€ 0,97
€ 2.910,00
9000 - 12000
€ 0,893
€ 2.679,00
15000 - 27000
€ 0,821
€ 2.463,00
30000 - 57000
€ 0,755
€ 2.265,00
60000 +
€ 0,695
€ 2.085,00
*prijsindicatie
Related Products
The AS5047D is a high-resolution rotary position sensor ...
Description:
The AS5047D is a high-resolution rotary position sensor for fast absolute angle measurement over a full 360-degree range. The integrated circuit is a 14-bit on-axis magnetic rotary position sensor with 11-bit decimal and binary incremental pulse count. DAEC Dynamic Angle ...
The AS5601 is an easy-to-program 12-bit On-Axis Magnetic ...
Description:
The AS5601 is an easy-to-program 12-bit On-Axis Magnetic Rotary Position Sensor with quadrature incremental and push button output. This contactless Encoder measures the absolute angle of a diametric magnetised on-axis magnet. Contactless angle measurement insensitive to dust and dirtSimple user-programmable ...
The AS5162 is a contactless Hall-based magnetic position ...
Description:
The AS5162 is a contactless Hall-based magnetic position sensor for high accuracy angular measurement over a full turn of 360°. The integrated circuit is a 12-bit rotary position sensor with linear analogue output and overvoltage protection. 360º contactless high-resolution angular ...
Dual element devices are integrated circuits that contain ...
Description:
Dual element devices are integrated circuits that contain two independent Hall-effect switches. The digital outputs are out-of-phase (quadrature) when interfaced with the proper ring magnet design. These quadrature signals can be processed to determine target speed and direction. Alternately, the ...