91SS12-2 Honeywell,, Linear Hall Effect Sensor, 3-Pin SIP

  • RS-stocknr. 169-7650
  • Fabrikantnummer 91SS12-2
  • Fabrikant Honeywell
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

LOHET IC’s

Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed.

Three-pin in-line PCB terminals, 0.1in spacing
Laser trimmed thin and thick film resistors
-40 to 125°C operating range

Specificaties
Kenmerk Waarde
Magnetic Type Linear
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point -40 mT
Maximum Magnetic Sensor Operating Point 40 mT
Minimum Operating Supply Voltage 8 V dc
Maximum Operating Supply Voltage 16 V dc
Length 7.62mm
Width 0.6in
Height 0.07mm
Dimensions 0.3 x 0.6 x 0.07in
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type SIP
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 06-02-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Bag of 1000)
23,716
(excl. BTW)
28,696
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
1000 +
€ 23,716
€ 23.716,00
*prijsindicatie
Related Products
A range of Hall-effect magnetic sensors from Silicon ...
Description:
A range of Hall-effect magnetic sensors from Silicon Labs featuring chopper-stabilized Hall elements, low-noise amplifiers and 13-bit ADCs which provide a linear outputs proportional to magnetic field strength. The Si721x series are available with analogue, PWM or SENT (Single Edge ...
The Si7210 family of Hall-effect magnetic sensors from ...
Description:
The Si7210 family of Hall-effect magnetic sensors from Silicon Labs features an I2C interface which enables full configurability of the sensor operate and release points and allows measurement of the magnetic field strength. The Si7210 sensor integrates a chopper-stabilized Hall ...
Description:
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional ...
The omnipolar Hall ICs are magnetic switches that ...
Description:
The omnipolar Hall ICs are magnetic switches that can operate both S-and N-pole, upon which the output goes from Hi to Low. In addition to regular single-output Hall ICs, We offer a lineup of dual-output units with a reverse output ...