- RS-stocknr.:
- 177-5550
- Fabrikantnummer:
- A1230LLTR-T
- Fabrikant:
- Allegro Microsystems
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 177-5550
- Fabrikantnummer:
- A1230LLTR-T
- Fabrikant:
- Allegro Microsystems
Wetgeving en compliance
- Land van herkomst:
- GB
Productomschrijving
A1230 Dual Channel Quadrature Hall Effect Bipolar Switch, Allegro Microsystems
The Allegro Microsystems A1230 is a dual-channel, bipolar switch with two Hall-effect sensing elements. Each element provides a separate digital output for speed and direction signal processing.
The Hall elements are aligned with an accuracy greater than 1 μm. This accuracy makes it ideal for use in ring magnet based, speed and direction systems located in harsh automotive and industrial environments.
The A1230 contains two independent Hall-effect bipolar switches located 1 mm apart. The digital outputs are out of phase so the outputs are in quadrature when interfaced with the proper ring magnet design. Low-drift amplifiers guarantee symmetry between the switches.
The Allegro high-frequency chopper-stabilisation cancels offsets in each channel providing stable operation over the full specified temperature and voltage ranges.
The A1230 is available in a plastic 8-pin SOIC surface mount package and a plastic 4-pin SIP.
The Hall elements are aligned with an accuracy greater than 1 μm. This accuracy makes it ideal for use in ring magnet based, speed and direction systems located in harsh automotive and industrial environments.
The A1230 contains two independent Hall-effect bipolar switches located 1 mm apart. The digital outputs are out of phase so the outputs are in quadrature when interfaced with the proper ring magnet design. Low-drift amplifiers guarantee symmetry between the switches.
The Allegro high-frequency chopper-stabilisation cancels offsets in each channel providing stable operation over the full specified temperature and voltage ranges.
The A1230 is available in a plastic 8-pin SOIC surface mount package and a plastic 4-pin SIP.
AEC-Q100 automotive qualified
Two matched Hall-effect switches on a single substrate
1 mm Hall element spacing
Superior temperature stability and industry-leading jitter performance through use of advanced chopper stabilisation topology
Integrated LDO regulator provides 3.3 V operation
Integrated ESD protection from outputs and VCC to ground
High-sensitivity switchpoints
Robust structure for EMC protection
Reverse-battery protection on supply and both output pins
Two matched Hall-effect switches on a single substrate
1 mm Hall element spacing
Superior temperature stability and industry-leading jitter performance through use of advanced chopper stabilisation topology
Integrated LDO regulator provides 3.3 V operation
Integrated ESD protection from outputs and VCC to ground
High-sensitivity switchpoints
Robust structure for EMC protection
Reverse-battery protection on supply and both output pins
Hall Effect Sensors, Allegro MicroSystems
Specificaties
Kenmerk | Waarde |
---|---|
Mounting Type | Surface Mount |
Magnetic Type | Bipolar |
Maximum Operating Supply Voltage | 18 V |
Minimum Operating Supply Voltage | 3.3 V |
Package Type | SOIC |
Pin Count | 8 |
Maximum Operating Temperature | +150 °C |
Minimum Operating Temperature | -40 °C |
- RS-stocknr.:
- 177-5550
- Fabrikantnummer:
- A1230LLTR-T
- Fabrikant:
- Allegro Microsystems