A3213EUA-T Allegro Microsystems,, Omnipolar Hall Effect Sensor Switch, 3-Pin Ultra Mini SIP

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

A3213/4 Micropower Ultrasensitive Hall Effect Switches, Allegro Microsystems

The Allegro Microsystems A3213/4 ultra-sensitive, pole independent Hall-effect switches with a latched digital output are aimed at use in battery-operated, portable equipment. Their 2.4 V to 5.5 V operation and a unique clocking scheme reduces the average operating power use. The A3213 to 825 μW and the A3214 to 14 μW (typical, at 2.75 V).

Either a north or south pole turns on the output.

They include a Hall-voltage generator, small-signal amplifier, chopper stabilisation, a latch, and a MOSFET output.

AEC-Q100 automotive qualified
Micropower operation
Superior temperature stability
Low switchpoint drift
Insensitive to physical stress
High ESD protection

Hall Effect Sensors, Allegro MicroSystems

Specificaties
Kenmerk Waarde
Magnetic Type Omnipolar
Mounting Type Through Hole
Pin Count 3
Minimum Magnetic Sensor Release Point -70 Gs
Maximum Magnetic Sensor Operating Point 70 Gs
Minimum Operating Supply Voltage 2.4 V
Maximum Operating Supply Voltage 5.5 V
Length 4.09mm
Width 1.52mm
Height 3.02mm
Dimensions 4.09 x 1.52 x 3.02mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
Package Type Ultra Mini SIP
Typical Magnetic Sensor Hysteresis 10 Gs
380 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
545 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
1,04
(excl. BTW)
1,26
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
€ 1,04
€ 5,20
25 - 95
€ 0,728
€ 3,64
100 - 245
€ 0,572
€ 2,86
250 - 495
€ 0,528
€ 2,64
500 +
€ 0,50
€ 2,50
*prijsindicatie
Verpakkingsopties
Related Products
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed. Three-pin in-line PCB terminals, 0.1in spacingLaser trimmed thin and thick film resistors-40 to 125°C operating range. ...
A linear output Hall Effect magnetic field sensor ...
Description:
A linear output Hall Effect magnetic field sensor from Taiwan Semiconductor. The device produces a ratiometric output voltage proportional to the applied magnetic flux density over a range of ±800 Gauss. Supply voltage: 3.0 to 6.5VSupply current: 2.2mA (typ)Bandwidth: 20kHzMagnetic ...
Description:
Allegro Current sensor ICs in CA and CB packagesConductor resistance of 100 μΩ typical for ultra low-power lossAutomotive grade options for harsh applications environments3000 Vrms galvanic isolation.
The BU52075GWZ is omnipolar Hall IC incorporating a ...
Description:
The BU52075GWZ is omnipolar Hall IC incorporating a polarity determination circuit that enables separate operation (output) of both the South and North poles. The polarity judgement is based on the output processing configuration. This Hall IC product can be in ...