ACS758LCB-050U-PFF-T Allegro Microsystems,, Linear Hall Effect Sensor, 3.3, 5V, 5-Pin CB

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

50A to 200A Integrated Current Sensor ICs, Allegro MicroSystems

Allegro Current sensor ICs in CA and CB packages
Conductor resistance of 100 μΩ typical for ultra low-power loss
Automotive grade options for harsh applications environments
3000 Vrms galvanic isolation

Hall Effect Current Sensors, Allegro MicroSystems

Specificaties
Kenmerk Waarde
Magnetic Type Linear
Mounting Type Through Hole
Pin Count 5
Minimum Operating Supply Voltage 3 V
Maximum Operating Supply Voltage 5.5 V
Length 10mm
Width 13mm
Height 7mm
Dimensions 10 x 13 x 7mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +150 °C
Package Type CB
63 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
127 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
7,18
(excl. BTW)
8,69
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 7,18
25 - 99
€ 5,42
100 - 249
€ 4,58
250 - 499
€ 4,29
500 +
€ 4,24
Verpakkingsopties
Related Products
The AS5162 is a contactless Hall-based magnetic position ...
Description:
The AS5162 is a contactless Hall-based magnetic position sensor for high accuracy angular measurement over a full turn of 360°. The integrated circuit is a 12-bit rotary position sensor with linear analogue output and overvoltage protection. 360º contactless high-resolution angular ...
A range of Hall-effect magnetic sensors from Silicon ...
Description:
A range of Hall-effect magnetic sensors from Silicon Labs featuring chopper-stabilized Hall elements, low-noise amplifiers and 13-bit ADCs which provide a linear outputs proportional to magnetic field strength. The Si721x series are available with analogue, PWM or SENT (Single Edge ...
The Si7210 family of Hall-effect magnetic sensors from ...
Description:
The Si7210 family of Hall-effect magnetic sensors from Silicon Labs features an I2C interface which enables full configurability of the sensor operate and release points and allows measurement of the magnetic field strength. The Si7210 sensor integrates a chopper-stabilized Hall ...
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches ...
Description:
The A3211/2 are ultrasensitive, pole independent, Hall-effect switches with latched digital output. Their 2.5 V to 3.5 V operation and unique clocking scheme reduces the average operating power to less than 15 μW with a 2.75 V supply.Either a north ...