ITT Cannon Cable Boot Sure Seal Black, Nitrile Rubber (NBR), 15.49 mm
- RS-stocknr.:
- 167-9556
- Fabrikantnummer:
- 317-1397-000
- Fabrikant:
- ITT Cannon
Bulkkorting beschikbaar
Subtotaal (1 verpakking van 5 eenheden)*
€ 71,18
(excl. BTW)
€ 86,13
(incl. BTW)
Voeg 10 eenheden toe voor gratis bezorging
Op voorraad
- 105 stuk(s) klaar voor verzending
- 635 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 5 - 95 | € 14,236 | € 71,18 |
| 100 - 195 | € 13,456 | € 67,28 |
| 200 + | € 12,772 | € 63,86 |
*prijsindicatie
- RS-stocknr.:
- 167-9556
- Fabrikantnummer:
- 317-1397-000
- Fabrikant:
- ITT Cannon
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ITT Cannon | |
| Product Type | Heat Shrink Boot | |
| Sub Type | Cable Boot | |
| Material | Nitrile Rubber (NBR) | |
| Number of Breakouts | 1 | |
| Colour | Black | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 105°C | |
| Maximum Inside Diameter | 15.49mm | |
| Minimum Inside Diameter | 9.65mm | |
| Standards/Approvals | No | |
| Series | Sure Seal | |
| Adhesive Backing | No | |
| Alles selecteren | ||
|---|---|---|
Merk ITT Cannon | ||
Product Type Heat Shrink Boot | ||
Sub Type Cable Boot | ||
Material Nitrile Rubber (NBR) | ||
Number of Breakouts 1 | ||
Colour Black | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 105°C | ||
Maximum Inside Diameter 15.49mm | ||
Minimum Inside Diameter 9.65mm | ||
Standards/Approvals No | ||
Series Sure Seal | ||
Adhesive Backing No | ||
- Land van herkomst:
- CN

Sureseal Cable Boots
Seals wired cable jackets to the connector housing
Provides abrasion resistance
IP67 ITT Sureseal & Mini Sureseal
Developed to meet the increased requirements for safety and reliability in the automotive field these sealed connectors satisfy all of the parameters defined by automotive/industrial standards covering such areas as vibration, shock, salt water spray, industrial gas, low millivolt drop and low contact resistance.
The simple, one-piece moulded body means that no other parts, apart from the contacts, are required to complete the connection
The plugs and receptacles are polarised to prevent mis-mating, by means of 2 stepped planes on each of the mating faces, which must be properly oriented in order for the contacts to engage
The mated connectors are IP67 rated and sealing integrity is still maintained with exposure to brake fluid, gasoline, diesel fuel, anti-freeze, ultra-violet, ozone and steam cleaning under normal operating conditions
Cable Boots, see for example, stock no. 167-9540 to seal the wired cable jacket to the connector housing are available and must be ordered separately.
Sure-Seal connectors incorporate many features:
The mini Sure-Seal range of connectors offers all the advantages of the ITT Sureseal product but with reduced size. The compact design coupled with resistance to brake fluid, anti-freeze, fuels and steam cleaning enables the connector to be used in any harsh environment area of the vehicle.
Note
Contacts must be ordered separately
Gerelateerde Links
- ITT Cannon Cable Boot, 16.51mm
- ITT Cannon Cable Boot, 19.05mm
- ITT Cannon Black Boot for use with SURE-SEAL Series Circular Connector
- ITT Cannon Trident Connector Black, Plastic
- ITT Cannon Flange Flange for use with Cannon APD Connector
- ITT Cannon Cable Clamp
- ITT Cannon Crimp Circular Connector Contact
- ITT Cannon Black Copper Cable Grommet
