TE Connectivity Straight 202K1 Black, Modified Polyolefin, 30 mm
- RS-stocknr.:
- 718-3332P
- Fabrikantnummer:
- 202K132-3-0
- Fabrikant:
- TE Connectivity
Bulkkorting beschikbaar
Subtotaal 15 eenheden (geleverd in een zak)*
€ 385,50
(excl. BTW)
€ 466,50
(incl. BTW)
Voeg 15 eenheden toe voor gratis bezorging
Op voorraad
- Plus verzending 86 stuk(s) vanaf 13 februari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 15 - 49 | € 25,70 |
| 50 + | € 23,84 |
*prijsindicatie
- RS-stocknr.:
- 718-3332P
- Fabrikantnummer:
- 202K132-3-0
- Fabrikant:
- TE Connectivity
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | TE Connectivity | |
| Product Type | Heat Shrink Boot | |
| Sub Type | Straight | |
| Material | Modified Polyolefin | |
| Number of Breakouts | 1 | |
| Shrink Temperature | 90°C | |
| Colour | Black | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 135°C | |
| Minimum Shrunk Diameter | 5.9mm | |
| Maximum Shrunk Diameter | 14.2mm | |
| Maximum Inside Diameter | 30mm | |
| Minimum Inside Diameter | 30mm | |
| Standards/Approvals | No | |
| Adhesive Backing | No | |
| Series | 202K1 | |
| Alles selecteren | ||
|---|---|---|
Merk TE Connectivity | ||
Product Type Heat Shrink Boot | ||
Sub Type Straight | ||
Material Modified Polyolefin | ||
Number of Breakouts 1 | ||
Shrink Temperature 90°C | ||
Colour Black | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 135°C | ||
Minimum Shrunk Diameter 5.9mm | ||
Maximum Shrunk Diameter 14.2mm | ||
Maximum Inside Diameter 30mm | ||
Minimum Inside Diameter 30mm | ||
Standards/Approvals No | ||
Adhesive Backing No | ||
Series 202K1 | ||
- Moulded Boot Straight size 32
- Installation of Straight Lipped Moulded Parts using a Hot Air Gun
- Installation of Straight Lipped Moulded Parts using a Hot Air Gun
- Installation of Straight Lipped Moulded Parts using a Hot Air Gun
- Installation of Straight Lipped Moulded Parts using a Hot Air Gun
- Product Change Notification
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.