TE Connectivity End Cap PD Caps Black, Polyolefin, 6.35 mm
- RS-stocknr.:
- 874-1500
- Fabrikantnummer:
- PD-CAP-1/4-0
- Fabrikant:
- TE Connectivity
Bulkkorting beschikbaar
Subtotaal (1 verpakking van 200 eenheden)*
€ 34,60
(excl. BTW)
€ 41,80
(incl. BTW)
Voeg 600 eenheden toe voor gratis bezorging
Op voorraad
- 8.600 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 200 - 2800 | € 0,173 | € 34,60 |
| 3000 - 9800 | € 0,167 | € 33,40 |
| 10000 + | € 0,162 | € 32,40 |
*prijsindicatie
- RS-stocknr.:
- 874-1500
- Fabrikantnummer:
- PD-CAP-1/4-0
- Fabrikant:
- TE Connectivity
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | TE Connectivity | |
| Sub Type | End Cap | |
| Product Type | Heat Shrink Boot | |
| Material | Polyolefin | |
| Number of Breakouts | 1 | |
| Shrink Temperature | 125°C | |
| Colour | Black | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 110°C | |
| Minimum Inside Diameter | 4mm | |
| Maximum Shrunk Diameter | 2.03mm | |
| Maximum Inside Diameter | 6.35mm | |
| Standards/Approvals | UL E85381 | |
| Series | PD Caps | |
| Adhesive Backing | No | |
| Alles selecteren | ||
|---|---|---|
Merk TE Connectivity | ||
Sub Type End Cap | ||
Product Type Heat Shrink Boot | ||
Material Polyolefin | ||
Number of Breakouts 1 | ||
Shrink Temperature 125°C | ||
Colour Black | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 110°C | ||
Minimum Inside Diameter 4mm | ||
Maximum Shrunk Diameter 2.03mm | ||
Maximum Inside Diameter 6.35mm | ||
Standards/Approvals UL E85381 | ||
Series PD Caps | ||
Adhesive Backing No | ||
Vrijgesteld
- Land van herkomst:
- CZ
PD Heat Shrink Cap
Semirigid, encapsulant-lined heat shrink end caps with a shrink ratio of 3:1. When the dual wall PD Caps are briefly heated, the outer jacket shrinks while the inner wall flows into voids in the crimp, creating an encapsulated and electrically insulated connection.
Features and benefits
• Easy and fast installation
• 3:1 shrink ratio
• Permanent or temporary way to terminate wires
• Rugged protection against abrasion, vibration, and flexing
PD CAP Kit contents
300 x 874-1497 Heatshrink Cap PD-CAP-1/8-0
200 x 874-1507 Heatshrink Cap PD-CAP-3/16-0
200 x 874-1500 Heatshrink Cap PD-CAP-1/4-0
100 x 874-1504 Heatshrink Cap PD-CAP-3/8-0
100 x 874-1513 Heatshrink Cap PD-CAP-1/2-0
Kit supplied in a reusuable plastic compartmented case
Note
PD Caps are not intended for use where immersion in fluids is required.