RS PRO Silicone Heater Mat, 24V ac, 52 W Cylindrical
- RS-stocknr.:
- 106-5414
- Fabrikant:
- RS PRO
Subtotaal (1 eenheid)*
€ 117,10
(excl. BTW)
€ 141,69
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 6 stuk(s) klaar voor verzending
- 9 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 117,10 |
*prijsindicatie
- RS-stocknr.:
- 106-5414
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Mat Shape | Cylindrical | |
| Product Type | Silicone Heater Mat | |
| Power Rating | 52W | |
| Diameter | 42mm | |
| Peak Temperature | 200°C | |
| Maximum Supply Voltage | 24V ac | |
| Standards/Approvals | BS3G210 Type B | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Mat Shape Cylindrical | ||
Product Type Silicone Heater Mat | ||
Power Rating 52W | ||
Diameter 42mm | ||
Peak Temperature 200°C | ||
Maximum Supply Voltage 24V ac | ||
Standards/Approvals BS3G210 Type B | ||
- Land van herkomst:
- GB
Preformed Heater Mats
Preformed silicone heater mats are thin and lightweight and have a low thermal mass, hence their rapid heat up characteristics and fast response to temperature control. The mats wide operating temperature range, flexibility and superb electrical properties give them a distinct advantage over other forms of heating. In applications where a heater mat is required to fit small diameter pipe-work a more precise fit can be obtained by using the pre-formed option.
Although the design dictates an accurate fit, this product is recommended to be used with a self-fusing tape to offer a more permanent securing method.
Features and Benefits
• For use on various sizes of process piping where standard heating methods are difficult to apply
• Flexible Silicone with Etched Foil heating elements
• Recommended to be used along with self-fusing tape as a means of extra installation support
• Fits to pipes within recommended diameter minimums and maximums
• Operating temperatures: +200°C intermittent (150°C continuous use)
Multi-Purpose Process Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning
These heaters shall only be used where adequate electrical, thermal and mechanical barriers are provided to prevent access to hazardous parts without the use of a tool.