- RS-stocknr.:
- 790-4827
- Fabrikant:
- RS PRO
23 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 41,10
(excl. BTW)
€ 49,73
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 41,10 |
5 - 9 | € 39,41 |
10 + | € 38,55 |
- RS-stocknr.:
- 790-4827
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en compliance
- Land van herkomst:
- CN
Productomschrijving
Micaflat Heaters
Mica heaters are best used on flat surfaces requiring heating where silicone or film heaters are not suitable for temperatures above 160 °C.
These heaters must be temperature controlled and fitted correctly for best performance.
Flat mica plate heaters are used in applications as e.g.: Dies, Platens, Moulds, Tanks, Process Machinery.
These heaters must be temperature controlled and fitted correctly for best performance.
Flat mica plate heaters are used in applications as e.g.: Dies, Platens, Moulds, Tanks, Process Machinery.
Constructed by winding resistance wire
Insulated and terminal connections fitted
Encased in Zintec sheet which gives good mechanical strength and protection
High temperature surface heating up to 260 °C
Insulated and terminal connections fitted
Encased in Zintec sheet which gives good mechanical strength and protection
High temperature surface heating up to 260 °C
Flat Plate Mica Heaters
Used when heat is needed on a flat surface, but when it is impractical to bore a hole in the plate. The flat mica heater allows heat to be distributed evenly across the surface. A much higher watt density can be achieved using these heaters than with silicone rubber mat heaters. 280°C maximum operating temperature.
Specificaties
Kenmerk | Waarde |
---|---|
Power Rating | 100 W |
Peak Temperature | +260°C |
Supply Voltage | 230 V ac |
Dimensions | 60 x 60 mm |