HARTING Heavy Duty Power Connector, Panel, Screw, 4 Way, 10A, Han A Female, 230V, 400 V

This heavy-duty power connector provides a robust, industrial-grade Interface for power distribution in automation and electrical systems. Supplied as a kit containing both housing and insert, it is intended for demanding installations where secure screw termination and a protective enclosure are required. The product suits environments that need a Compact four-contact female insert with protective earth.

• Rated for 10 A current to support moderate power loads
• Conductor range 0.75 to 1.5 mm² for common wiring sizes
• Screw termination with M3 contact screw for secure connections
• PE contact present to maintain protective earth continuity
• Insulation resistance greater than 10^10 Ω to limit leakage
• Temperature rating −40 to +125 °C for wide operating conditions

• Suitable for industrial control panels requiring four poles
• Ideal for machinery power connections with earth protection
• Used for factory automation distribution between modules
• Can be used in rail vehicle systems meeting fire safety levels

Use 0.25 N·m for contact screws and 0.8 N·m for the PE screw to ensure correct clamping.

Strip conductors to 2.5 to 5.5mm before screw termination for proper contact engagement.

The insert is polycarbonate and the contacts are a silver-plated copper alloy.

It is rated for at least 500 mating cycles, suitable for occasional disconnection.

Male and female inserts may be fitted to a hood or housing if the installation requires such a reverse configuration.

UL, CSA, SEV