Hi-Force, Portable General Purpose Hydraulic Cylinder, HSS54 Single Acting 4.5 t 100 mm
- RS-stocknr.:
- 807-930
- Fabrikantnummer:
- HSS54
- Fabrikant:
- Hi-Force
Subtotaal (1 eenheid)*
€ 452,72
(excl. BTW)
€ 547,79
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 30 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 452,72 |
*prijsindicatie
- RS-stocknr.:
- 807-930
- Fabrikantnummer:
- HSS54
- Fabrikant:
- Hi-Force
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Hi-Force | |
| Product Type | General Purpose Hydraulic Cylinder | |
| Closed Height | 182mm | |
| Stroke Length | 100mm | |
| Extended Height | 282mm | |
| Cylinder Effective Area | 14.4cm² | |
| Oil Capacity | 64cm³ | |
| Maximum Operating Pressure | 700 bar | |
| Action Type | Single Acting | |
| Cylinder Capacity | 4.5t | |
| Weight | 1.5kg | |
| Outside Diameter | 38 mm | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk Hi-Force | ||
Product Type General Purpose Hydraulic Cylinder | ||
Closed Height 182mm | ||
Stroke Length 100mm | ||
Extended Height 282mm | ||
Cylinder Effective Area 14.4cm² | ||
Oil Capacity 64cm³ | ||
Maximum Operating Pressure 700 bar | ||
Action Type Single Acting | ||
Cylinder Capacity 4.5t | ||
Weight 1.5kg | ||
Outside Diameter 38 mm | ||
Standards/Approvals No | ||
N.v.t.
- Land van herkomst:
- GB
Standard Cylinders
For lifting and pushing applications where flexibility and high cycle requirements exist
Non-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity. Suitable for use in a diverse range of industries including, mining, power stations, railways shipyards and steelworks.
Service and repair seal kits are available (808-185, 808-179)
Cylinders
High quality single acting, spring return cylinders, manufactured from high strength alloy steels, and providing a minimum safety factor of 3:1
Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability
Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension
All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard.
All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet
The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar
For suitable oil see technical specification of Hydraulic Hand Pumps
Warning
Saftey Note - High pressure hydraulic equipment can work at extremely high pressures and careful attention should be paid to working pressures when choosing accessories.