Hi-Force, Portable Low Height Hydraulic Cylinder, HPS200 Single Acting 20 t 11 mm
- RS-stocknr.:
- 808-084
- Fabrikantnummer:
- HPS200
- Fabrikant:
- Hi-Force
Subtotaal (1 eenheid)*
€ 464,10
(excl. BTW)
€ 561,56
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 4 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 464,10 |
*prijsindicatie
- RS-stocknr.:
- 808-084
- Fabrikantnummer:
- HPS200
- Fabrikant:
- Hi-Force
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Hi-Force | |
| Product Type | Low Height Hydraulic Cylinder | |
| Stroke Length | 11mm | |
| Closed Height | 52mm | |
| Extended Height | 63mm | |
| Cylinder Effective Area | 28.6cm² | |
| Oil Capacity | 31cm³ | |
| Cylinder Capacity | 20t | |
| Maximum Operating Pressure | 700 bar | |
| Action Type | Single Acting | |
| Weight | 2.6kg | |
| Outside Diameter | 100 mm | |
| Standards/Approvals | No | |
| Alles selecteren | ||
|---|---|---|
Merk Hi-Force | ||
Product Type Low Height Hydraulic Cylinder | ||
Stroke Length 11mm | ||
Closed Height 52mm | ||
Extended Height 63mm | ||
Cylinder Effective Area 28.6cm² | ||
Oil Capacity 31cm³ | ||
Cylinder Capacity 20t | ||
Maximum Operating Pressure 700 bar | ||
Action Type Single Acting | ||
Weight 2.6kg | ||
Outside Diameter 100 mm | ||
Standards/Approvals No | ||
N.v.t.
- Land van herkomst:
- GB
Low Height Pad Cylinders-High Pressure
Combine minimum collapsed height with optimum stroke
They provide a short adjusting and lifting force in confined work areas
Steel stop rings further increase the cylinders capacity to withstand side loads and restrain the piston at full extension
Low Height Cylinders
High quality single acting, spring return cylinders, manufactured from high strength alloy steels, and providing a minimum safety factor of 3:1
Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability
Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension
All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard
All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet
The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar
For suitable oil see technical specification of Hydraulic Hand Pumps
Maintenance seal kits are available separately
Warning
Safety Note - High pressure hydraulic equipment can work at extremely high pressures and careful attention should be paid to working pressures when choosing accessories.