Parker Single CETOP Mounting Hydraulic Check Valve ZRD-BZ01-S0-D1

  • RS-stocknr. 134-7033
  • Fabrikantnummer ZRD-BZ01-S0-D1
  • Fabrikant Parker
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

CETOP 03 Check Valves

Sandwich design check valves from Parker Hannifin for use with CETOP 03 stackable hydraulic flow valves. Throttle check is available on port A or B and A + B configurations (See manufacturers part number).

Features and Benefits

• Mountable in any position • High flow capacity
• DIN 24340 A6 / ISO 4401 / NFPA D03 Mounting interface
• 0.7 bar opening pressure
• MTTF 150 years

Check Valves

These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity.

Specificaties
Kenmerk Waarde
Manufacturer Series ZRD
CETOP Mounting CETOP 3
Single/Double Single
Cracking Pressure 0.7bar
Maximum Operating Pressure 350 bar
Maximum Flow Rate 80L/min
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
344,82
(excl. BTW)
417,23
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 344,82
Related Products
This Sferaco check valve is anti-pollution to prevent ...
Description:
This Sferaco check valve is anti-pollution to prevent reverse water flow. Constructed from brass that ensures strength and reliability. Featuring a male and female connection of " (10 mm). Brass construction Control the flow of water Strong and reliable fitting ...
Double union ends with plain bore for solvent ...
Description:
Double union ends with plain bore for solvent cement jointing. Vibration free even at high velocity.
The LCV1 series bronze lift check valve by ...
Description:
The LCV1 series bronze lift check valve by Spirax Sarco is designed to prevent reverse flow. Prevents reverse flowReduces water-hammer damage from hydraulic pressure surgesInstalled in horizontal lines.
Non-return or check valves which allow flow in ...
Description:
Non-return or check valves which allow flow in one direction only. Suitable for steam, water and oil applicationsMetal-to-metal seatPressure rating 9 bar at 180°C, 20 bar at 100°C.