Parker Double CETOP Mounting Hydraulic Check Valve ZRD-ABZ02-S0-D1

  • RS-stocknr. 134-7043
  • Fabrikantnummer ZRD-ABZ02-S0-D1
  • Fabrikant Parker
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

CETOP 05 Check Valves

Sandwich design check valves from Parker Hannifin for use with CETOP 05 stackable hydraulic flow valves. Throttle check is available on port A or B and A + B configurations (See manufacturers part number).

Features and Benefits

• Mountable in any position • High flow capacity
• DIN 24340 A10 / ISO 4401 / NFPA D05 Mounting interface
• 0.7 bar opening pressure
• MTTF 150 years

Applications

Suitable for general and industrial hydraulic applications and machine tooling.

Check Valves

These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity.

Specificaties
Kenmerk Waarde
Manufacturer Series ZRD
CETOP Mounting CETOP 5
Single/Double Double
Cracking Pressure 0.7bar
Maximum Operating Pressure 315 bar
Maximum Flow Rate 160L/min
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
508,99
(excl. BTW)
615,88
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 508,99
Related Products
Double union ends with plain bore for solvent ...
Description:
Double union ends with plain bore for solvent cement jointing. Vibration free even at high velocity.
The Filmaster® filling loop designed to allow sealed ...
Description:
The Filmaster® filling loop designed to allow sealed heating systems to be charged via a temporary mains supply connection. 1/8in. BSP test port on isolating double check valve15mm compression connectionsProtects against Class 3 contamination risksBall valve with lever for easy ...
These CETOP mounting flow control check valves are ...
Description:
These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity. Pilot operated ...
A range of CETOP mounting flow control valves ...
Description:
A range of CETOP mounting flow control valves for limiting the flow of hydraulic fluid to actuators. They operate using mineral oils (HL, HLP) to DIN 51 524 with a viscosity range of 10 to 800mm²/s. For vertical stacking assemblies ...