Parker Single CETOP Mounting Hydraulic Check Valve ZRV-P-01

  • RS-stocknr. 134-7044
  • Fabrikantnummer ZRV-P-01
  • Fabrikant Parker
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

CETOP 03 Check Valves

Sandwich design check valves from Parker Hannifin for use with CETOP 03 stackable hydraulic flow valves. Throttle check is available on port A or B and A + B configurations (See manufacturers part number).

Features and Benefits

• Mountable in any position • High flow capacity
• DIN 24340 A6 / ISO 4401 / NFPA D03 Mounting interface
• 0.7 bar opening pressure
• MTTF 150 years

Check Valves

These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity.

Specificaties
Kenmerk Waarde
Manufacturer Series ZRV
CETOP Mounting CETOP 3
Single/Double Single
Cracking Pressure 0.5bar
Maximum Operating Pressure 350 bar
Maximum Flow Rate 40L/min
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
291,01
(excl. BTW)
352,12
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 291,01
Related Products
These CETOP mounting flow control check valves are ...
Description:
These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity. Pilot operated ...
A range of CETOP mounting flow control valves ...
Description:
A range of CETOP mounting flow control valves for limiting the flow of hydraulic fluid to actuators. They operate using mineral oils (HL, HLP) to DIN 51 524 with a viscosity range of 10 to 800mm²/s. For vertical stacking assemblies ...
A pilot operated sandwich design check valve from ...
Description:
A pilot operated sandwich design check valve from Parker Hannifin for use with CETOP 03 stackable hydraulic flow valves. The outlet flow is blocked while inlet flow is free. Pressure at the inlet line opens teh check valve and allows ...
Ermeto Original or EO® progressive ring fittings, for ...
Description:
Ermeto Original or EO® progressive ring fittings, for metric tube, are manufactured from mild steel, with zinc plated and passivated finish. They are available in light duty and heavy duty series to cover a wide range of pressure ratings. Each ...