Parker Single CETOP Mounting Hydraulic Check Valve ZRE-B01-D1

  • RS-stocknr. 134-7047
  • Fabrikantnummer ZRE-B01-D1
  • Fabrikant Parker
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

CETOP 03 Pilot Operated Check Valve

A pilot operated sandwich design check valve from Parker Hannifin for use with CETOP 03 stackable hydraulic flow valves. The outlet flow is blocked while inlet flow is free. Pressure at the inlet line opens teh check valve and allows flow at the outlet. Throttle check is available on port A or B and A + B configurations (See manufacturers part number).

Features and Benefits

• Mountable in any position • High flow capacity
• DIN 24340 A06/ ISO 4401 / NFPA D03 Mounting interface
• 1.2 bar opening pressure
• Pilot opening ratio (pilot to main) 1:6
• MTTF 150 years

Applications

Suitable for general and industrial hydraulic applications and machine tooling.

Check Valves

These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity.

Specificaties
Kenmerk Waarde
Manufacturer Series ZRE
CETOP Mounting CETOP 3
Single/Double Single
Cracking Pressure 1.2bar
Maximum Operating Pressure 350 bar
Maximum Flow Rate 60L/min
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
352,55
(excl. BTW)
426,59
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 352,55
Related Products
Application : Industry, pneumatics, hydraulic, plumbing installationsOperating Temperature ...
Description:
Application : Industry, pneumatics, hydraulic, plumbing installationsOperating Temperature : -20゚C / +100゚C Operating pressure : see non-shock cold working pressure chart on data sheetThreads : ISO 228 parallel female by female threads Stem : NylonNBR 65 SH/PS seal on nylon ...
A compact stainless steel non return disc check ...
Description:
A compact stainless steel non return disc check valve designed for use with steam and hot condensate. These valves have a CE marking of PN25 / PN40. Connections are flanged (wafer type)Low pressure dropSimple and compact designHorizontal or vertical installation. ...
These CETOP mounting flow control check valves are ...
Description:
These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity. Pilot operated ...
A range of CETOP mounting flow control valves ...
Description:
A range of CETOP mounting flow control valves for limiting the flow of hydraulic fluid to actuators. They operate using mineral oils (HL, HLP) to DIN 51 524 with a viscosity range of 10 to 800mm²/s. For vertical stacking assemblies ...