RS PRO Line Mounting Hydraulic Flow Control Valve, G 1/8

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: IT
Productomschrijving

Double Acting Needle Valves

Allows flow in both directions.

Needle adjustment for full shut off or accurate control for a wide range of flow rates
A graduated adjustable scale below the handle to indicate valve position
Locking screw prevents movement accidental or due to vibration
Nitrile rubber seals

Flow Control Valves

Single acting and double acting in-line flow control valves. Single acting valves allow flow control in one direction and free flow in the opposite direction. Double acting valves allow flow control in both directions.

Specificaties
Kenmerk Waarde
Connection Port Thread G 1/8
Maximum Flow Rate 7.8L/min
Body Material Steel
Seal Material Nitrile Rubber
Thread Size 1/8in
Thread Standard G
Maximum Operating Temperature +100°C
Minimum Operating Temperature -20°C
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
3 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
62,05
(excl. BTW)
75,08
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 62,05
5 - 9
€ 60,15
10 +
€ 58,19
Related Products
A range of hydraulic diverter valves with flow ...
Description:
A range of hydraulic diverter valves with flow rates of either 20, 50 and 90 litres/min which when line mounted can provide up to five additional intermittent functions without affecting the original machine function. The valves can be bolted together ...
Valve offering simple and accurate speed control and ...
Description:
Valve offering simple and accurate speed control and flow regulation. Easy to read flow graduation scale, with position locking screw Built in safety stop prevents unintentional withdrawal of the handwheelRetaining nut included to enable panel mountingNitrile rubber seals0.5 bar cracking ...
High pressure flow control valves for general purpose ...
Description:
High pressure flow control valves for general purpose use in a hydraulic system. Single ActingEasy to read colour flow graduation scale and a locking screw to stabilise flowNitrile rubber sealsTemp. range -10 to +100°C0.5 bar cracking pressure.
Components for use with the Enerpac range of ...
Description:
Components for use with the Enerpac range of high-pressure hydraulic equipment. All fittings and valves are 700 bar pressure-rated and have 3/8 - 18 NPTF threads. For use with high pressure hydraulic equipment to control cylinder speedCan also be used ...