Bosch Rexroth Hydraulic Gear Pump 0510725112, 22.5cm3

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Self Aspirating External Gear Pump, 1:8 Tapered Shaft

New principle for the housing sealing, giving long housing service life
Long service life for seals, even at maximum temperature
Plain bearing for high loads
Monoblock bearing
Simple and robust design
New principle of hydrostatic side clearance compensation

Note

Maximum permissible degree of contamination of pressure fluid to NAS 1638, Class10. To achieve this, we recommend a filter with a minimum retention rate of B20 ≥100. To ensure a long service life; filtration to NAS 1638, Class 9 is recommended - this is achievable with a filter retention rate of B10≥100.

//media.rs-online.com/t_line/L371018-01.gif

Gear Pumps

Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.

Specificaties
Kenmerk Waarde
Manufacturer Series AZP
Displacement 22.5cm³
Direction of Rotation Clockwise
Maximum Rotational Speed 3500rpm
Minimum Rotational Speed 500rpm
Minimum Speed At Maximum Pressure 700rpm
Maximum Operating Pressure 250 bar
Body Dimensions 126.5 x 87 x 112mm
Weight 4.2kg
Body Height 112mm
Body Length 126.5mm
Body Width 87mm
4 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
281,10
(excl. BTW)
340,13
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 281,10
Related Products
Parker PGP/PGM 500 series gear pumps are an ...
Description:
Parker PGP/PGM 500 series gear pumps are an advanced performance version of the international “bushing block” style pumps. PGP/PGM 500 series pumps offer superior performance, high efficiency and low noise operation at high operating pressures. A wide variety of standard ...
Choice of two barrel pumps, designed for use ...
Description:
Choice of two barrel pumps, designed for use with 40 gallon metal drums, which will pump up to Hypoid 90 viscosityLever action pump (RS 672-425) incorporates 84cm galvanised steel suction tubeRotary action pump (RS 672-419) incorporates 96cm steel suction tube ...
Heavy duty pistonless polythene displacement pump which discharges ...
Description:
Heavy duty pistonless polythene displacement pump which discharges on the down strokeSupplied complete with anti-drip nozzle, thread adaptor for 12mm bore hose, multi-adaptor for raised screw neck closures, adaptor to fit standard plastic drum internal thread and telescopic dip-tube to ...
The SKF 728619 E is a two stage ...
Description:
The SKF 728619 E is a two stage pump suitable for mounting bearings or components with a maximum pressure of 150 MPa. • Oil container capacity 2550 cm³• Two stage pressure pumping• Fitted with pressure gauge and supplied with a ...