362mm Synthetic Rubber Hydraulic Hose Assembly, 400 bar Max Pressure, -40 → +100°C

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IT
Productomschrijving

Straight Hydraulic Hose Assembly

High-quality flexible hydraulic hose assemblies with crimped end fittings. Each assembly features one piece end fitting (which eliminates an incorrectly matched insert and sleeve) and matching hoses.
Hoses are synthetic rubber tube with synthetic rubber outer covering and high tensile steel wire reinforcing. Fittings are zinc plated mild steel.

Applications

Applications include medium pressure service with petroleum base hydraulic fluids, mineral oils, lubricating oils, water glycol, water-oil emulsion hydraulic fluids, hot oil, grease, crude and fuel oils, air and water

Note

These assemblies are not suitable for use with our range of high pressure hydraulic cylinders and pumps which have working pressures to 700 bar. They are outside the terms of our BS 5750 Part 2 stockist of assessed capability level B registration. Pin prick cover for air or gas applications above 17 bar (250 psi).

Warning

  • Flexible hose assemblies are capable of transmitting fluids at high pressures. Careful attention should be given to application, material & technical specifications.
Specificaties
Kenmerk Waarde
Overall Length 362mm
Inside Diameter 1/4in
Connector A Straight G 1/4 Female
Connector B Straight G 1/4 Female
Inner Hose Material Synthetic Rubber
Reinforcing Material Steel
Cover Material Synthetic Rubber
Maximum Operating Pressure 400 bar
Connector B - Thread Standard G
Connector A - Angle Straight
Connector B - Thread Size 1/4in
Connector A - Thread Standard G
Connector B - Gender Female
Connector A - Gender Female
Connector A - Thread Size 1/4in
Connector B - Angle Straight
Minimum Operating Temperature -40°C
Maximum Operating Temperature +100°C
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
12,38
(excl. BTW)
14,98
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 12,38
Related Products
Portable (18kg), compact (688mm tall x 305mm deep) ...
Description:
Portable (18kg), compact (688mm tall x 305mm deep) and ruggedly built pressComes equipped with die ring suitable for all sizes of hoseColour-coded die train set required for each different size of hoseHigh pressure hydraulic pump and hose link required to ...
Themo plastic hydraulic hoses for use in demanding ...
Description:
Themo plastic hydraulic hoses for use in demanding environments and applications. The hoses come supplied with a male coupling ready assembled for direct connection to a pump or cylinder and have a maximum working pressure of 700 bar. 4:1 design ...
High quality thermoplastic hydraulic hoses, that are suitable ...
Description:
High quality thermoplastic hydraulic hoses, that are suitable for use with our range of hydraulic hand pumps, and high pressure cylinders, when assembling a system for various pushing, pulling, positioning and lifting applications.All hoses come supplied with 3/8" - 18NPT ...
Introducing the RS Pro O-Ring (Female) with 1/4" ...
Description:
Introducing the RS Pro O-Ring (Female) with 1/4" hose. Perfect for attaching to hoses for further use with equipment such as pressure washers or garden hoses.