1956mm Synthetic Rubber Hydraulic Hose Assembly, 275 bar Max Pressure, -40 → +100°C

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IT
Productomschrijving

Straight Hydraulic Hose Assembly

High-quality flexible hydraulic hose assemblies with crimped end fittings. Each assembly features one piece end fitting (which eliminates an incorrectly matched insert and sleeve) and matching hoses.
Hoses are synthetic rubber tube with synthetic rubber outer covering and high tensile steel wire reinforcing. Fittings are zinc plated mild steel.

Applications

Applications include medium pressure service with petroleum base hydraulic fluids, mineral oils, lubricating oils, water glycol, water-oil emulsion hydraulic fluids, hot oil, grease, crude and fuel oils, air and water

Note

These assemblies are not suitable for use with our range of high pressure hydraulic cylinders and pumps which have working pressures to 700 bar. They are outside the terms of our BS 5750 Part 2 stockist of assessed capability level B registration. Pin prick cover for air or gas applications above 17 bar (250 psi).

Warning

  • Flexible hose assemblies are capable of transmitting fluids at high pressures. Careful attention should be given to application, material & technical specifications.
Specificaties
Kenmerk Waarde
Overall Length 1956mm
Inside Diameter 1/2in
Connector A Straight G 1/2 Female
Connector B Straight G 1/2 Female
Inner Hose Material Synthetic Rubber
Reinforcing Material Steel
Cover Material Synthetic Rubber
Maximum Operating Pressure 275 bar
Connector B - Thread Standard G
Connector A - Angle Straight
Connector B - Thread Size 1/2in
Connector A - Thread Standard G
Connector B - Gender Female
Connector A - Thread Size 1/2in
Minimum Operating Temperature -40°C
Maximum Operating Temperature +100°C
Connector A - Gender Female
Connector B - Angle Straight
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
9 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
44,32
(excl. BTW)
53,63
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 44,32
Related Products
Themo plastic hydraulic hoses for use in demanding ...
Description:
Themo plastic hydraulic hoses for use in demanding environments and applications. The hoses come supplied with a male coupling ready assembled for direct connection to a pump or cylinder and have a maximum working pressure of 700 bar. 4:1 design ...
The RS PRO hydraulic hose assembly works on ...
Description:
The RS PRO hydraulic hose assembly works on 280bar pressure. It is made of stainless steel. It is a flexible hose that is used to transport fluid from one component to another within a hydraulic machine. • Lightweight• More flexible• ...
High quality flexible hydraulic hose assemblies with crimped ...
Description:
High quality flexible hydraulic hose assemblies with crimped end fittings. Each assembly features one piece end fittings (which eliminates an incorrectly matched insert and sleeve) and matching hoses which are assembled together using dedicated crimping machinery and dies. The crimp ...