Directional Spool Valve Bosch Rexroth, R900561276, CETOP 3, Y, 24V dc

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Solenoid Operated Directional Spool Valves, CETOP 3, Size 6

6X Series direct operating, spring return and detent directional control spool valves.

Solenoid operated by a 24Vdc or 110Vac power supply
Porting Pattern to CETOP 3 size 6 for subplate mounting
Wet pin dc or ac removable solenoids can be rotated through 90° to facilitate installation
Connections to DIN 24 340 Form A6 ISO 4401-AB-03-4-A
Emergency hand operation
Seal kit available separately
Coils can be replaced without releasing any fluid
Replacement solenoid coils 24Vdc and 110Vac are available separately

Note

Take care to prevent pressure intensification in single rod cylinders.

//media.rs-online.com/t_line/LD256026-01.gif
Specificaties
Kenmerk Waarde
Manufacturer Series 6X
CETOP Mounting CETOP 3
Number of Ports 4-way
Number of Positions 2
Spool Type Y
Solenoid Type Double
Power Supply Voltage 24V dc
Maximum Operating Pressure 350 bar
Maximum Flow Rate 60L/min
Maximum Operating Temperature +50°C
Minimum Operating Temperature -20°C
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 22-01-2021, met een levertijd van 1 werkdag.
Prijs Each
232,61
(excl. BTW)
281,46
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 232,61
Related Products
A range of CETOP mounting flow control valves ...
Description:
A range of CETOP mounting flow control valves for limiting the flow of hydraulic fluid to actuators. They operate using mineral oils (HL, HLP) to DIN 51 524 with a viscosity range of 10 to 800mm²/s. For vertical stacking assemblies ...
Manually operated directional control spool valves. Porting is ...
Description:
Manually operated directional control spool valves. Porting is to CETOP 3 size 6, for subplate mountingMaximum working pressure 315 barMaximum flow rate 60 l/minFour spool options are available with a choice of spring return or a detent featureWith detent the ...
These manifold blocks form the basis of complete ...
Description:
These manifold blocks form the basis of complete control systems in a vertical stacking configurationCompact hydraulic circuits can be built on each axis, using vertical stacked sandwich plate valves in combination with directional control valvesCircuits have a common pressure and ...
These CETOP mounting pressure reducing valves are designed ...
Description:
These CETOP mounting pressure reducing valves are designed for use in multi-pressure systems where some equipment operates at a lower pressure. They are suitable for use with mineral oil (HL, HLP) to DIN 51524 fluid types from 10 to 800 ...