2m Zinc Plated Steel Hydraulic Tubing, 1.5mm Wall Thickness, 345 bar, -40 to +120°C

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: ES
Productomschrijving

Zinc Plated, Yellow Passivated Finish

Surface finish has a plating thickness of 8 to 12 microns which provides high corrosion resistance and a similar appearance to the EO range of hydraulic tube fittings

Standards

DIN 2391/C

Hydraulic Seamless Tube

Metric sizes of cold drawn steel tube in fine grain quality (RR) material type ST37.4 to DIN 1630 NBK. Tube manufactured to DIN 2391/C and supplied in 2m lengths, with capped ends to prevent dirt ingress. Tensile strength RM is 340N/mm2 minimum. Yield point ReH is 235N/mm2 minimum. Ductile yield A5 (longit) is 25% minimum. Temperature range (without pressure reduction) is -40°C to +120°C. The tubes are compatible with the range of EO hydraulic tube fittings, for fluid applications.

Specificaties
Kenmerk Waarde
Length 2m
Outside Diameter 12mm
Wall Thickness 1.5mm
Maximum Operating Pressure 345 bar
Material Steel
Weight 0.4kg/m
Finish Zinc Plated
Maximum Operating Temperature +120°C
Minimum Operating Temperature -40°C
27 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 3)
16,553
(excl. BTW)
20,029
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
3 - 12
€ 16,553
€ 49,659
15 +
€ 16,043
€ 48,129
*prijsindicatie
Related Products
The TE Connectivity DR-25 series black 50m heat ...
Description:
The TE Connectivity DR-25 series black 50m heat shrink tubing has 2:1 shrink ratio. It protects wires and cables against damage from chemicals, abrasion and fluids. The tubing is ideal for use in high-temperature environments as it has been specially ...
The HIS-3 BAG series is a flexible thin ...
Description:
The HIS-3 BAG series is a flexible thin wall heatshrink tubing made from polyolefin offering good cable protection and insulations and being an ideal solution for the electronics industry. It is a reliable electrical insulation and is ideal for cable ...
The TF Series tubing is an ideal heatshrinkable ...
Description:
The TF Series tubing is an ideal heatshrinkable sleeve where higher fire protection is required. It is used for protection insulation and cable, identification and light duty harnesses. Thin walledFlexiblePolyolefin cross linked material (PO-X)Reduced inventory due to fewer sizes covering ...
Hydraulic hoses with a galvanised steel wire outer ...
Description:
Hydraulic hoses with a galvanised steel wire outer covering and high tensile steel reinforcing wire. Each assembly features one piece end fitting (which eliminates an incorrectly matched insert and sleeve) and matching hoses.