ITT Cannon Speedy D Series 1.27mm Pitch 15 Way IDC D-Sub Ribbon Cable Connector, Plug, Steel Shell

  • RS-stocknr. 437-310
  • Fabrikantnummer DASF-15P-K87
  • Fabrikant ITT Cannon
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: PL
Productomschrijving

Sub-Miniature D-Type IDC Connectors

These connectors provide fast reliable mass termination to Speedbloc® ribbon cable without the need to separate individual wires before assembly.

No cable stripping, soldering or expensive tooling is required
Fully compatible with conventional D connectors and accepts all standard locking systems
Low profile, robust cadmium plated steel shells with black thermoplastic housings fitted with gold plated contacts on a 1.27mm pitch
Can be daisy chained if required
Dims assembled (mm): Width 13, Depth 17 Ways/Length 15//39, 25//53, 37//69

Specificaties
Kenmerk Waarde
Gender Male
Number of Contacts 15
Body Orientation Right Angle
Pitch 1.27mm
Contact Material Copper Alloy
Contact Plating Gold over Nickel
Housing Material Steel
Current Rating 1.5A
Voltage Rating 780 V ac
Dimensions 39.1 x 16.2 x 12.9mm
Series Speedy D
Depth 12.9mm
Length 39.1mm
Maximum Operating Temperature +125°C
Minimum Operating Temperature -55°C
Width 16.2mm
12 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
132 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
9,04
(excl. BTW)
10,94
(incl. BTW)
Aantal stuks
Per stuk
1 - 19
€ 9,04
20 - 39
€ 8,13
40 +
€ 7,32
Verpakkingsopties
Related Products
A D-sub connector is a common type of ...
Description:
A D-sub connector is a common type of electrical devise named by their D shaped metal shield feature. When they were introduced, D-subs were among the smallest connectors used on computer systems.TE Connectivity's range of crimp d-sub connectors boast tin ...
Permanent pull loops for AMP-LATCH IDC ribbon cable ...
Description:
Permanent pull loops for AMP-LATCH IDC ribbon cable receptacle and pin connectors. These pull loops are made from natural colour PVC, 94-VTM-1 rating. For details of connectors that these pull loops can be used with please see additional data table. ...
Thermoplastic backshell for use with D-subminiature connectors. These ...
Description:
Thermoplastic backshell for use with D-subminiature connectors. These backshells have a clam type shell with a 180° cable exit angle and accept a cable insulation diameter range of 3.00 to 11mm. Each d-subminiature backshell consists of the following components:2 x ...
Low profile connectors with bright tin finish and ...
Description:
Low profile connectors with bright tin finish and grounding indents for EMI/RFI protection. Provides high speed mass termination onto flat ribbon cable (26-28awg wire)Contact rating 1A, contact resistance 15mΩComplies with BS9523 & MIL–C–24308 size With strain relief clamp.