Male C14 IEC Filter Flange Mount,Spade,Rated At 6A,250 V ac Operating Frequency 50/60Hz

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

TE Connectivity Inlet IEC Filter

The TE Connectivity GG series inlet filter is a male type, screw mount power entry module. It has a voltage rating is 250VAC with a high-performance current rating of 15A. The key functions are an IEC C14 appliance inlet, a type TA45 circuit breaker and a 2-pole switch. The circuit breaker has a manual reset feature with 2-pole thermal overload protection or no bi-metal for 2-pole ON/OFF switching only. This series is suitable for high inrush currents and high transient loads, providing a practical solution over fused modules with inherent power dissipation limitations.

Schurter range:
Panel mount, IEC inlet plugs with integral mains filter and ultra-compact design. Fuse holders accept 5mm x 20mm fuses.

Features and Benefits

Spade terminals
Available with or without interconnection block for unfiltered versions

Applications

Computing and accessories
Instrumentation and measurement
Plasma/LCD televisions

Certifications

UL approved
CSA certified
VDE approved

Specificaties
Kenmerk Waarde
Gender Male
Number of Fuses None
Switch Type None
Termination Method Spade
Current Rating 6A
Voltage Rating 250 V ac
Mounting Type Flange Mount
Operating Frequency 50/60Hz
IEC Connector Type C14
Width 50.3mm
Depth 69.6mm
Height 22.2mm
179 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
15,58
(excl. BTW)
18,85
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 15,58
10 - 24
€ 14,48
25 - 49
€ 12,98
50 - 99
€ 12,62
100 +
€ 11,12
Verpakkingsopties
Related Products
Easy to installCompact designCost optimized constructionDegree of protection ...
Description:
Easy to installCompact designCost optimized constructionDegree of protection front side with power plug: IP 401)ENEC2)UL and cUL approval.
A comprehensive range of C14 mains filters with ...
Description:
A comprehensive range of C14 mains filters with fuse and 2 pole switch, suitable for a wide range of inlet power panel mount applications, for use with C13 connectors. Standard filters fitted with a single Ø 5 x 20 mm ...
The FN9263 power entry module combines an IEC ...
Description:
The FN9263 power entry module combines an IEC inlet, mains filter with excellent filter attenuation and a mains switch in a small form factor. A wide selection on amperage ratings and mounting possibilities are designed to offer you the desired ...
TE Corcom P Series are a comprehensive range ...
Description:
TE Corcom P Series are a comprehensive range of versatile power entry modules with a small footprint. These power entry modules feature a standard IEC 60321-1 C14 power inlet, and offer metric and North American fusing capabilities alongside an optional ...