TLE5012BE1000XUMA1 Infineon, Inclinometer Sensor 2-Axis, 8-Pin DSO

  • RS-stocknr. 170-2314
  • Fabrikantnummer TLE5012BE1000XUMA1
  • Fabrikant Infineon
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

The TLE5012B is a 360° angle sensor that detects the orientation of a magnetic field. This is achieved by measuring sine and cosine angle components with monolithic integrated Giant Magneto Resistance (iGMR) elements. Highly precise angle values are determined over a wide temperature range and a long lifetime using an internal autocalibration algorithm. Data communications are accomplished with a bi-directional Synchronous Serial Communication (SSC) that is SPI-compatible. The absolute angle value and other values are transmitted via SSC or via a Pulse-Width-Modulation (PWM) Protocol.

Giant Magneto Resistance (GMR)-based principle
Integrated magnetic field sensing for angle measurement
Full calibrated 0 - 360° angle measurement with revolution counter and angle speed measurement
Two separate highly accurate single bit SD-ADC
15 bit representation of absolute angle value on the output (resolution of 0.01°)
16 bit representation of sine / cosine values on the interface

Specificaties
Kenmerk Waarde
Number of Axis 2
Technology Digital
Mounting Type Surface Mount
Package Type DSO
Pin Count 8
Dimensions 5 x 4 x 1.45mm
Length 5mm
Width 4mm
Height 1.45mm
Maximum Frequency Response 4.3MHz
Maximum Operating Supply Voltage 5.5 V
Minimum Operating Supply Voltage 3 V
Minimum Operating Temperature -40 °C
Minimum Frequency Response 3.8MHz
Maximum Operating Temperature +150 °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 06-07-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (On a Reel of 2500)
2,351
(excl. BTW)
2,845
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
2500 - 2500
€ 2,351
€ 5.877,50
5000 - 5000
€ 2,198
€ 5.495,00
7500 +
€ 2,116
€ 5.290,00
*prijsindicatie
Related Products
The TE Connectivity 3038 accelerometers are encased within ...
Description:
The TE Connectivity 3038 accelerometers are encased within a hermetic LCC package suitable for high performance applications. Long-term stability enabled by the integrated gas-damped piezoresistive element. Designed for use in harsh environments, suitable applications for these accelerometers include vibration and ...
Dual element devices are integrated circuits that contain ...
Description:
Dual element devices are integrated circuits that contain two independent Hall-effect switches. The digital outputs are out-of-phase (quadrature) when interfaced with the proper ring magnet design. These quadrature signals can be processed to determine target speed and direction. Alternately, the ...
Description:
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional ...
The omnipolar Hall ICs are magnetic switches that ...
Description:
The omnipolar Hall ICs are magnetic switches that can operate both S-and N-pole, upon which the output goes from Hi to Low. In addition to regular single-output Hall ICs, We offer a lineup of dual-output units with a reverse output ...