AL797AMA-AE Sensitec, Inclinometer Sensor -9 +9 V, 10-Pin SMD

  • RS-stocknr. 792-4206
  • Fabrikantnummer AL797AMA-AE
  • Fabrikant Sensitec
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

MagnetoResistive FixPitch Sensors

A range of MagnetoResistive FixPitch position sensors from Sensitec, available in a range of different pitches. Each position sensor incorporates two Wheatstone bridges on chip.
The sensor outputs are proportional to sine and cosine of the coordinates measured. Each sensor is matched to a particular pole length (equivalent to half the magnetic period). PerfectWave technology is incorporated to ensure that the higher harmonics are removed and precision is maintained by using multiple sensors.

Features and Benefits:

Contactless angle and position measurement
Large air gap
Excellent accuracy
Minimized offset voltage
Negligible hysteresis

Product Applications

Suitable applications for these position sensors include motor integrated encoders and motor feedback systems.

Magnetoresistive Sensors, Sensitec

Specificaties
Kenmerk Waarde
Mounting Type Surface Mount
Package Type SMD
Pin Count 10
Dimensions 6 x 2.6 x 1.4mm
Length 6mm
Width 2.6mm
Height 1.4mm
Maximum Operating Supply Voltage 9 V
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage -9 V
Minimum Operating Temperature -40 °C
Minimum Frequency Response 1MHz
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
A range of Hall-effect magnetic sensors from Silicon ...
Description:
A range of Hall-effect magnetic sensors from Silicon Labs. The devices combine chopper-stabilized Hall elements, low-noise amplifiers, 13-bit ADCs and comparators to produce high precision magnetically activated switches. The device output changes state if the pre-programmed magnetic threshold is crossed, ...
Description:
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional ...
The AS5047D is a high-resolution rotary position sensor ...
Description:
The AS5047D is a high-resolution rotary position sensor for fast absolute angle measurement over a full 360-degree range. The integrated circuit is a 14-bit on-axis magnetic rotary position sensor with 11-bit decimal and binary incremental pulse count. DAEC Dynamic Angle ...
The AS5162 is a contactless Hall-based magnetic position ...
Description:
The AS5162 is a contactless Hall-based magnetic position sensor for high accuracy angular measurement over a full turn of 360°. The integrated circuit is a 12-bit rotary position sensor with linear analogue output and overvoltage protection. 360º contactless high-resolution angular ...