Apem Green Halo LED Indicator, 12 → 24 V dc, 19.1mm Mounting Hole Size, Lead Wires Termination, IP67

  • RS-stocknr. 122-5551
  • Fabrikantnummer QH19028GC
  • Fabrikant APEM
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Apem Halo LED Illuminated Indicators, QH Series

A new illuminated halo designed to impress with stylish visual feedback using optimal high-quality hyper bright LEDs. The functional design enables the QH series to be easily mounted as a status indicator allied with a broad range of 16 mm, 19 mm and 22 mm switches used in either interior or exterior designs. The QH series is IP67 sealed and has zero depth from behind panel and comes in black or yellow frames combined with either a frosted white or tinted lens. These units are held onto the panel by the nut of the switch and an adhesive gasket.

Potential Applications:

Only a few examples of potential applications are shown here but they illustrate how versatile these units are.

Transportation: Can be used with door activation buttons on buses/trains. The dual colour unit could illuminate red when the button is activated by a passenger while the train is still moving. This informs them the button is activated but the door cannot yet be opened. It could then be easily programmed to illuminate green when the train comes to a stop and the doors open.

Manufacturing: Can be used with an emergency stop button. The halo ring could be on continuously for poorly lit areas, or illuminate when the E-Stop is activated.

Security/door access – Single colour provides added visual aid for door exit buttons, dual colour - secure areas, illuminated red no entry, card swipe changes status to green providing entry.

Single colour units are used to indicate when a push button is activated and could be used for almost any industry or application.

Features:

12 illuminated LEDs
Red, yellow and green single colour
Red/Green dual colour
Cut outs for 16 mm, 19 mm, 22 mm switches and with a bigger outside diameter 22 mm large for emergency stop switches
Supply voltage: 12 to 24 V dc at 10 mA - 20 mA
26awg wire, 200 mm long

LED Indicator Bezels

Specificaties
Kenmerk Waarde
Voltage Rating 12 → 24 V dc
Light Output Colour Green
Mounting Hole Size 19.1mm
Lamp Type Halo LED
Termination Type Lead Wires
IP Rating IP67
Bezel Style Round
Bezel Colour Black
Current Rating 20 mA
Intensity 350 mcd
Length 5.5 mm
Shape Round
27 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
16,43
(excl. BTW)
19,88
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 16,43