Phoenix Contact Ethernet Switch

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Phoenix Contact Industrial Ethernet Switches

A comprehensive range of Industrial Ethernet Switches from Phoenix Contact to suit a variety of applications. Auto negotiation & autocrossing makes for a quick & efficient installation. Various temperature ranges & DIN profiles available.

Features and Benefits

• Ethernet switch, various RJ45 port configurations available. • SC & ST Connections also supported on selected options.
• AC or DC supply voltages .
• Automatic detection of data.
• Transmission speed of 10 or 100 Mbps (Ethernet in RJ45 twisted pair).
• Fibreoptic ports support 100 Mpbs via SC & ST connection.
• Autonegotiation and autocrossing functions.
• LEDs: link and activity per port.
• Maximum conductor length (twisted pair) 100 m.
• Lean Managed options available.
• IP20 rated degree of protection.

Typical Applications

Ethernet switches can be used in a wide variety of areas, they are generally used where there is a need for multiple ethernet outputs and one port will not suffice. • Military applications
• Small offices / homes

Specificaties
Kenmerk Waarde
RJ45 Ports 5
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
5 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
224,24
(excl. BTW)
271,33
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 224,24
Related Products
Most industrial computer systems provide standard RS-232 serial ...
Description:
Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which ...
Communications processor CP 343-1 for connection of SIMATIC ...
Description:
Communications processor CP 343-1 for connection of SIMATIC S7-300 to Industrial Ethernet via ISO and TCP/IP, PROFINET IO controller or PROFINET IO device, integrated 2-port switch ERTEC 200, S7 communication, fetch/write, send/receive with and without RFC1006, Multicast DHCP, NTC- CPU ...
The SW-005 is an Unmanaged Ethernet Switch with ...
Description:
The SW-005 is an Unmanaged Ethernet Switch with 5 galvanically isolated ports. It has a wide voltage range which means it can be powered from USB or on a 24V factory floor. 5 Port switchCompact designWall mountablePower inputs 5-30V dcRemovable ...
The ED-504 is a converter from Ethernet to ...
Description:
The ED-504 is a converter from Ethernet to Digital I/O, also serial port and a switch. 4 Digital ports either Input or Output1 x RS232/RS422/RS485 Serial PortEthernet Switch for "daisy-chaining"Factory floor process control and automationLED status indication5 to 30 Vdc ...