SERIAL-ENET MODULE, 2 PORT, DEVICELINX

  • RS-stocknr. 708-0012
  • Fabrikantnummer UD2100002-01
  • Fabrikant Lantronix
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Lantronix Serial To Ethernet Module

The Lantronix serial to Ethernet 2-port module is equipped with flexible power options. It also includes PoE, the UDS makes it simple to network-enabled equipment without changing the way you work. This module is supplied with Lantronix’s COM Port Redirector (CPR) software powered by TruPort™ technology, UDS creates a fully transparent serial connection to the existing PC-based software applications for making it possible to remotely connect to equipment already in the field as if it were connected to a local PC serial port.

Features and Benefits

Networks virtually any device in minutes
Access, monitor and control equipment over Ethernet
Replace dedicated PCs and/or modem lines with fast and reliable Ethernet networking
Configure quickly and easily via HTTP, DHCP, Telnet, serial or Lantronix Device Installer utility
Supports RS-232, RS-422 and RS-485 communications (Two DB9M DTE serial ports for UDS2100)
Delivers flexible power configurations eliminating the need for costly power converters
Simplifies deployment with a tightly integrated, proven form factor rated for use under harsh conditions
Enables interoperability with a versatile collection of ready-to-use networking protocols
Provides new business intelligence from network-enabled equipment
Serial connectors are UDS2100 (dual-port): 2 x DB9M (DTE)
Modes are RS232, RS422 or RS485 (2-and 4-wire configurations supported)
Baud rate is 300bps to 921.6Kbps
Speed is10/100/Auto Mbps

Certifications

FCC certified
C/UL approved
CSA certified
VCCI certified
CE certified
TUV certified
CTick certified
UL 864 9th Edition standards (UDS1100)
WEEE certified

Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 25-10-2022, met een levertijd van 1 werkdag.
Prijs Each
250,17
(excl. BTW)
302,71
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 250,17
Related Products
The SFP10GAOC3M is a Cisco SFP-10G-AOC3M compatible fiber ...
Description:
The SFP10GAOC3M is a Cisco SFP-10G-AOC3M compatible fiber optical SFP cable that is designed, programmed and tested to work with Cisco® brand 10 Gb compatible servers or routers and complies with MSA industry standards.This active optical SFP cable (AOC) supports ...
The QSFP4X10GAO3 is a Cisco QSFP-4X10G-AOC3M compatible optical ...
Description:
The QSFP4X10GAO3 is a Cisco QSFP-4X10G-AOC3M compatible optical quad small form-factor pluggable (QSFP+) breakout cable that is designed, programmed and tested to work with Cisco® brand compatible servers or routers and complies with MSA industry standards. Connecting a single QSFP+ port (40 GbE) to ...
The QSFP40GAO7M is an MSA compliant optical quad ...
Description:
The QSFP40GAO7M is an MSA compliant optical quad small form-factor pluggable (QSFP+) cable that is designed, programmed and tested to work with 40 GbE compatible switches and routers. This AOC QSFP+ cable supports 40 Gigabit Ethernet applications (4 x 10GbE) ...
The SFP4X10AO15 is a Cisco QSFP-4X10G-AOC10M compatible optical ...
Description:
The SFP4X10AO15 is a Cisco QSFP-4X10G-AOC10M compatible optical quad small form-factor pluggable (QSFP+) breakout cable that is designed, programmed and tested to work with Cisco® brand compatible servers or routers. Connecting a single QSFP+ port (40 GbE) to four 10G SFP+ ports, this active optical breakout ...